Altec Pressure Digger I HD35A-12

Altec - Pressure Digger I HD35A-12

Supplier: Altec Australia

Pressure Digger I HD35A-12

The HD35A-12 is available with a digging depth of 3.6 m, and is capable of easily driving augers up to 1.8 m in diameter.

In Stock

Features:

Non-Insulating Pressure Digger
Continuous Digging Capacity to 1.8 Diameter Hole
High Performance Inertia Drive System
Ergonomic Work Station
Cummins 160 hp Diesel Engine
Drive Torque to 40,675 N.m
Variable Speed Drive System to 160 RPM
90 mm Square Kelly Bar for Increased Resistance to Bending
Mast Levelling, 20° to Left, Right and Rear
Set-Up Mast Without Paying-Out Winch Line
240° Rotation
Main Digger Frame Extends and Retracts 914 mm
Subbase Mounting for 30 m Chassis
Ram Cylinder Extend Force to 16,167 kg
Tool Storage and Drop Pocket
189.3 L Fuel Tank Capacity

Specifications:

Nominal Digging Depth: 3.7 m
Lowest Overall Working Height Mast/Pole-Setter Retracted: 6.6 m
Maximum Sheave Height Telescopic Pole-Setter: 9.1 m

To contact Altec Australia about Altec Pressure Digger I HD35A-12 use Get a quote.

Features:

Non-Insulating Pressure Digger
Continuous Digging Capacity to 1.8 Diameter Hole
High Performance Inertia Drive System
Ergonomic Work Station
Cummins 160 hp Diesel Engine
Drive Torque to 40,675 N.m
Variable Speed Drive System to 160 RPM
90 mm Square Kelly Bar for Increased Resistance to Bending
Mast Levelling, 20° to Left, Right and Rear
Set-Up Mast Without Paying-Out Winch Line
240° Rotation
Main Digger Frame Extends and Retracts 914 mm
Subbase Mounting for 30 m Chassis
Ram Cylinder Extend Force to 16,167 kg
Tool Storage and Drop Pocket
189.3 L Fuel Tank Capacity

Specifications:

Nominal Digging Depth: 3.7 m
Lowest Overall Working Height Mast/Pole-Setter Retracted: 6.6 m
Maximum Sheave Height Telescopic Pole-Setter: 9.1 m

Read less...

To contact Altec Australia about Altec Pressure Digger I HD35A-12 use Get a quote.

AI Overview BETA

Altec’s Pressure Digger I HD35A-12 is a non-insulating machine for drilling holes and driving augers, powered by a Cummins 160 hp diesel engine. It can dig continuously to a hole diameter of 1.8 m, covering large-bore auger work. Mast levelling lets operators position the mast to the left, right or rear, giving control over the drilling angle.