Aluminum Electrical Enclosures | Type 4X/ ...

Aluminum Electrical Enclosures | Type 4X/ 6P Diecast 1590Z Series

Supplier: Hammond Electronics

1/4

Type 4X/ 6P Diecast Aluminum Enclosures 1590Z Series

11 Recent Views In Stock

Features

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
Two piece “tongue & groove” construction with a replaceable one-piece silicone rubber gasket provides protection against access of dust and water. Gasket supplied loose inside the enclosure (not pre-installed).
Gasket has a temperature rating of -40C to +150C
Ideal for repetitive opening and closing.
Four recessed stainless steel machine screws secure lid into tapped holes.
Easy to wall mount using “through box - blind hole” construction, outside of gasket protection.
Lid screws are self captivating (lid holes are threaded with the first installation of lid screws). (NOTE: Except for 1590Z060, 1590Z061, 1590Z062, and 1590Z063)
Designed to meet IP68.
North American Mark of Safety - cUL & UL listed. Certified to Type 4, 4X, 6, 6P.
All sizes except 1590Z060** carry an impact rating of IK08 per IEC62262
Painted versions are painted inside and out with a tough powder paint. Choice of textured black or smooth gray (RAL 7001).
For non-metallic (glass reinforced polyester) versions of these enclosures, see series 1590ZGRP

To contact Hammond Electronics about Aluminum Electrical Enclosures | Type 4X/ 6P Diecast 1590Z Series use Get a quote.

Features

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
Two piece “tongue & groove” construction with a replaceable one-piece silicone rubber gasket provides protection against access of dust and water. Gasket supplied loose inside the enclosure (not pre-installed).
Gasket has a temperature rating of -40C to +150C
Ideal for repetitive opening and closing.
Four recessed stainless steel machine screws secure lid into tapped holes.
Easy to wall mount using “through box - blind hole” construction, outside of gasket protection.
Lid screws are self captivating (lid holes are threaded with the first installation of lid screws). (NOTE: Except for 1590Z060, 1590Z061, 1590Z062, and 1590Z063)
Designed to meet IP68.
North American Mark of Safety - cUL & UL listed. Certified to Type 4, 4X, 6, 6P.
All sizes except 1590Z060** carry an impact rating of IK08 per IEC62262
Painted versions are painted inside and out with a tough powder paint. Choice of textured black or smooth gray (RAL 7001).
For non-metallic (glass reinforced polyester) versions of these enclosures, see series 1590ZGRP

Read less...

To contact Hammond Electronics about Aluminum Electrical Enclosures | Type 4X/ 6P Diecast 1590Z Series use Get a quote.

Spec Sheet(0.41MB)

AI Overview BETA

Hammond Electronics’ 1590Z Series is a two-piece diecast aluminium enclosure made from an alloy that is easy to machine. A replaceable one-piece silicone rubber gasket sits between its tongue-and-groove body and lid, helping keep dust and water out. Electronic instrument makers needing regular access get a design made for repeated opening and closing of the lid.