Electrical Enclosures | Type 1 Mild Steel Junction Box | CSKO Series

Application

• Designed for general purpose indoor commercial use as a junction, pull or switch box.

Standards

• UL-50 Type 1
• CSA Type 1
• Complies with:
  • NEMA Type 1
  • IEC 60529, IP20

Construction

• Formed and spot welded from 16 gauge (up to 30"x24") or 14 gauge (36"x24") steel.
• Flat steel covers fastened with plated steel screws.
• Keyhole slots permit cover to be lifted off without removing screws entirely.
• Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
• Through holes in back for wall mounting.
• Grounding location embossed in body.

Finish

• Enclosure and cover are finished in ANSI 61 gray powder coating.

To contact Hammond Electronics about Electrical Enclosures | Type 1 Mild Steel Junction Box | CSKO Series use Get a quote.

Application

• Designed for general purpose indoor commercial use as a junction, pull or switch box.

Standards

• UL-50 Type 1
• CSA Type 1
• Complies with:
  • NEMA Type 1
  • IEC 60529, IP20

Construction

• Formed and spot welded from 16 gauge (up to 30"x24") or 14 gauge (36"x24") steel.
• Flat steel covers fastened with plated steel screws.
• Keyhole slots permit cover to be lifted off without removing screws entirely.
• Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
• Through holes in back for wall mounting.
• Grounding location embossed in body.

Finish

• Enclosure and cover are finished in ANSI 61 gray powder coating.

Read less...

To contact Hammond Electronics about Electrical Enclosures | Type 1 Mild Steel Junction Box | CSKO Series use Get a quote.