Ama-Drainer 400/500 | Submersible Motor ...

Ama-Drainer 400/500 | Submersible Motor Pump

Supplier: KSB Australia

Vertical single-stage fully floodable submersible motor pumps in close-coupled design, IP68, with or without level control, max. immersion depth: 7 m.

27 Recent Views In Stock

Application

Automatic drainage of pits, shafts, yards and cellars at risk of flooding, lowering of surface water levels, drainage, drainage of underground passages, water extraction from rivers and reservoirs.

Main applications

Building services
Drainage
Groundwaterlevel (mining/buildings)
Sea -& Riverwater Extraction
Systems
Waste water
Waste water / sewage
Water
Water Extraction
Watertransport

Overview of technical data

Q (50Hz)	2.0 – 50.0 (m³/h)
H (50Hz)	1.5 – 22.5 (m)
Barrel casing	Yes
Type of bearing	Ball bearings
Drive	Electric motor
Drive frequency	50 Hz
Type of drive	Electric motor
Drive voltage	Low voltage
Connection to power supply	380/415 V 3~
No. of impeller entries	Single entry
Impeller material (EN standard)	PA, POLYAMID (PA)
Type of coupling	Direct, None
Type of lubrication	Grease lubrication
Max. permissible fluid temperature	40.0 (°C)
Pump set location	Wet well
Shaft material (EN standard)	1.4021, 1.4571
Suction characteristics	Non-priming
Type of casing	Volute casing
Type of impeller	Free flow impeller
Type of connection	Thread
UNSPSC classification	4015150300
Casing material (EN standard)	JL1040, 1.4401, 1.4301
eClass assignment	36410101, 36410000, 36410100, 00000000
Free passage	35.0 (mm)
Installation position	Vertical
Shaft seal type	Shaft seal ring, Mechanical seal
Main applications	Waste water / sewage, Building services, Water
Casing material	Chrome nickel steel, Stainless steel, Cast iron
Maximum drive rating	2.2 (kW)
Type of installation	Stationary, Transportable
Maximum speed of rotation	2800.0 (1/min)

BACK TO PRODUCT OVERVIEW

Application

Automatic drainage of pits, shafts, yards and cellars at risk of flooding, lowering of surface water levels, drainage, drainage of underground passages, water extraction from rivers and reservoirs.

Main applications

Building services
Drainage
Groundwaterlevel (mining/buildings)
Sea -& Riverwater Extraction
Systems
Waste water
Waste water / sewage
Water
Water Extraction
Watertransport

Overview of technical data

Q (50Hz)	2.0 – 50.0 (m³/h)
H (50Hz)	1.5 – 22.5 (m)
Barrel casing	Yes
Type of bearing	Ball bearings
Drive	Electric motor
Drive frequency	50 Hz
Type of drive	Electric motor
Drive voltage	Low voltage
Connection to power supply	380/415 V 3~
No. of impeller entries	Single entry
Impeller material (EN standard)	PA, POLYAMID (PA)
Type of coupling	Direct, None
Type of lubrication	Grease lubrication
Max. permissible fluid temperature	40.0 (°C)
Pump set location	Wet well
Shaft material (EN standard)	1.4021, 1.4571
Suction characteristics	Non-priming
Type of casing	Volute casing
Type of impeller	Free flow impeller
Type of connection	Thread
UNSPSC classification	4015150300
Casing material (EN standard)	JL1040, 1.4401, 1.4301
eClass assignment	36410101, 36410000, 36410100, 00000000
Free passage	35.0 (mm)
Installation position	Vertical
Shaft seal type	Shaft seal ring, Mechanical seal
Main applications	Waste water / sewage, Building services, Water
Casing material	Chrome nickel steel, Stainless steel, Cast iron
Maximum drive rating	2.2 (kW)
Type of installation	Stationary, Transportable
Maximum speed of rotation	2800.0 (1/min)

BACK TO PRODUCT OVERVIEW

Read less...

To contact KSB Australia about Ama-Drainer 400/500 | Submersible Motor Pump use Get a quote.

AI Overview BETA

The Ama-Drainer 400/500 is a vertical submersible motor pump for removing water from pits, shafts, yards and cellars at risk of flooding. Its fully floodable construction permits underwater installation to a maximum immersion depth of 7 m. Groundwater management in mining and buildings is an application, alongside wastewater handling and water extraction from rivers or reservoirs.