Atlas Waste Incinerators | 200 SL WS P

Read more...

To contact Antelope Engineering about Atlas Waste Incinerators | 200 SL WS P use Get a quote.

We're sometimes asked: ”why incinerate?” Here are some good reasons why we recommend incineration:

• It is widely accepted that incineration is the most environmentally friendly way to dispose of garbage and sludge oil. DNV recognise this with their “Clean Ship” notation which requires an incinerator to be installed
• Worldwide there is a lack of Port Reception Facilities for sludge oil and waste.
• Discharging sludge oil and garbage to shore is often very expensive. In some developing countries, a small amount of money is sometimes paid for the sludge oil, but there is an environmental impact when using sludge oil as fuel.

Unique Advantages

• Atlas incinerators operates without the installation of a Flue gas fan in the exhaust pipe (based upon a max counter pressure of 60 mm WG), saving the ship owner cost in terms of operation and maintenance of what has proven to be the most time consuming trouble point in an incinerator installation, due to imbalance of the impeller caused by soot from the hot exhaust gasses.
• Sludge oil mixing tanks are delivered with a circulation pump and a mill pump for agitation and comminution of the tank contents. This makes it possible to burn oil sludge with up to 50% water content, without adding additional diesel oil to the burners or having to drain the tanks
• Sludge oil with up to 50% water content: The IMO standard for sludge oil states that there is 20% water in the sludge oil. Ship Owners often have more water than this so it is important that the incinerator can also cope with higher water contents than the IMO standard
• Atlas Incinerators have always used a multi or 3-chamber design in an effort to make a more environmentally friendly incinerator.
• The Sludge burner is an Atlas Incinerators design of the air atomizing type with no moving parts, which via the sludge circulating pipe is equipped with a “self cleaning strainer” preventing any kind of blocking, hence no maintenance required and much reduced spare parts compared to rotary cup burners
• Simultaneous burning of sludge oil and solid waste.
• Easy and efficient

Specifications

W: 1599mm     L: 2152mm      H: 2152mm

Read less...

To contact Antelope Engineering about Atlas Waste Incinerators | 200 SL WS P use Get a quote.