Bachhuber Automatic Press Unloaders

Read more...

To contact GW Technologies about Bachhuber Automatic Press Unloaders use Get a quote.

Bachhuber (BMC) press unloaders are  ram-actuated press unloaders specifically designed for parts and/or trim removal in top-unloading press operations.  Actuated by a connection to the press ram or by a servomotor, these units significantly improve productivity and provide an efficient and safe alternative to manual parts handling.

• A range of accessories is available, including left-hand actuating arms (no additional cost), actuating arm guards, additional trays, tray out limit switches and auto-disconnect options.
• Other models available in the BMC series include trolley-mounted models (Model 300 series) and models for heavier parts and die cast applications.
• BMC Press unloaders connect directly to the press ram and therefore keep up with the operating speed of the press - a press speed of 45 SPM translates to parts unloading at a rate of 2700 parts per hour, compared to 300-400 parts per hour for manual handling.
• BMC press unloaders replace air ejection, thereby reducing noise levels;
• Rugged, precision-machined and welded frame for long service life;
• Easy setup and adjustment, with 1-bolt and 1-pin hookup and a single actuating arm.

BMC Model 75

Smallest in the BMC unloader range, designed for high-speed short-stroke presses.
Featuring:

• Up to 250mm (10") maximum stroke (tray travel)
• Up to 10" wide retrieval tray, with tray angle infinitely adjustable from 00 to 200
• Up to 100 strokes per minute (SPM) on automatic operation
• Linear way bearings on slide for friction-free movement and accurate travel
• Lubrication-free bearings at all other pivot points
• Adjustable height
• Press stroke range from 32mm (1.25") to 150mm (6")
• Bolster mounting (mounting brackets included)

BMC Model 100

Light weight design excellent for quick change over and easy hookup and removal.
Featuring:

• Up to 550 mm (22") maximum stroke (tray travel)
• Up to 450mm (18") wide retrieval tray, with tray angle infinitely adjustable from 00 to 200
• Up to 60 Strokes per minute on automatic operation
• Self-cleaning Nylon bearings on slide for friction-free movement and accurate travel
• Lubrication-free bearings at all other pivot points
• Adjustable height
• Press Stroke range 75mm (3") to 450mm (18)"
• Bolster mounting (mounting brackets and actuating arm guard included)

BMC Model 150

• Tray travel max. = 600.0mm [24"]
• Press stroke range = 75.0mm to 500.0mm [3" to 20"]
• Designed as a heavier upgrade to the Model 100, this unloader uses a linear bearings for smoother operation.

BMC Model 200

• Tray travel max. = 600.0mm [24"]
• Press stroke range = 75.0mm to 500.0mm [3" to 20"]
• Designed with two linear rails to unload wider & heavier parts and provide greater stability.

BMC Model 316

• Tray travel max. = 850.0mm [34"]
• Press stroke range = 175.0mm to 750.0mm [7" to 30"]
• With longer mainframe and linear rails, this is BMC's most popular unloader.

BMC Model 320

• Tray travel max. = 1100.0mm [44"]
• Press stroke range = 300.0mm to 1000.0mm [12" to 40"]
• Designed for longer stroke presses and to handle heavier applications.

BMC Model 614

• Tray travel max. = 1500.0mm [60"]
• Press stroke range = 250.0mm to 1000.0mm [10" to 40"]
• Model 600 series are for those applications where large and heavy parts need unloading.

Fine Blank Unloader BMC Model 220

• The Model 220 catches the slug and pulls the finished part off the lower die. They both land on their own trays. Parts can be ejected onto tables, conveyors, or into containers.

Special Custom Built Unloaders

• BMC can design and build your unloader to meet your specifications. Give us a call and see if we designed it already, you never know...

Read less...

To contact GW Technologies about Bachhuber Automatic Press Unloaders use Get a quote.