Battery Powered Electronic Blasting Machine ...
Electrical energy is converted into a strong shock wave of high temperature that, when applied inside a NONEL tube by the means of an electrode, initiates the tube.
DynoStartuses a common 9V battery and a durable electrode. Both battery and electrode are easy to change.
The electrode can be removed from the blasting machine at any time to prevent unauthorised usage.
DynoStartis designed to require the use of both hands when initiating the blast. This is to avoid unintentional firing of a blast.
Technical Description
The DynoStart blasting machine consists of an energy source, a voltage converter, a capacitor for energy storage, a voltage supervisioncircuit, an electrode and switches for control.
Electronic energy is converted into a strong shock wave of high temperature which is applied inside the NONEL tube, by means of the electrode, giving reliable initiation.
Instructions for use
To be used for the initiation of NONEL lead-in lines, either NONEL Starter Line or NONEL Extendaline.
After the pattern has been prepared for blasting in accordance with local regulations and is ready for firing, use DynoStart in the following way.
Preparation
Cut the end of the NONEL lead-in line with a knife or approved cutting device and discard the end seal.
Insert the cut of the NONEL tube intothe chuck on the DynoStart, ensuring that the tube end is inserted to the bottom of the chuck.
To contact Dyno Nobel Asia Pacific about Battery Powered Electronic Blasting Machine - DynoStart DS2 use Get a quote.
Electrical energy is converted into a strong shock wave of high temperature that, when applied inside a NONEL tube by the means of an electrode, initiates the tube.
DynoStartuses a common 9V battery and a durable electrode. Both battery and electrode are easy to change.
The electrode can be removed from the blasting machine at any time to prevent unauthorised usage.
DynoStartis designed to require the use of both hands when initiating the blast. This is to avoid unintentional firing of a blast.
Technical Description
The DynoStart blasting machine consists of an energy source, a voltage converter, a capacitor for energy storage, a voltage supervisioncircuit, an electrode and switches for control.
Electronic energy is converted into a strong shock wave of high temperature which is applied inside the NONEL tube, by means of the electrode, giving reliable initiation.
Instructions for use
To be used for the initiation of NONEL lead-in lines, either NONEL Starter Line or NONEL Extendaline.
After the pattern has been prepared for blasting in accordance with local regulations and is ready for firing, use DynoStart in the following way.
Preparation
Cut the end of the NONEL lead-in line with a knife or approved cutting device and discard the end seal.
Insert the cut of the NONEL tube intothe chuck on the DynoStart, ensuring that the tube end is inserted to the bottom of the chuck.
To contact Dyno Nobel Asia Pacific about Battery Powered Electronic Blasting Machine - DynoStart DS2 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product