Belt Conveyors | WCX Series

Read more...

To contact Westfield Augers Australia about Belt Conveyors | WCX Series use Get a quote.

This series includes a wide range of capacities and configurations. From our smallest electric powered conveyor to our giant 120’ (36.5m) swing away conveyor, you can be assured you are purchasing a well designed, reliable piece of equipment. From rice, lentils, chickpeas, fertiliser, sawdust, sand, feed pellets, fish meal, edible beans to organic grains of any type, the WCX range will make your job easier.

Product Features: 

• 2-ply Chevron belts with nylon slider back to greatly reduce tube wear and friction.
• Added advantage of a complete clear-out to reduce the chance of cross contamination of products
• Pinch “S” drive to virtually eliminate slipping
• Plastic hood and collapsible canvas hopper to provide cushioning for fragile materials
• Industrial quality bearings on each roller to ensure correct tension and alignment
• Single seam along the top of the tube to reduce grain damage and resistance to flow
• Steel trussing (rather than cables) on models 100’ (30.4m) and longer to provide superior support with practically no sag under load
• Weather guards to provide the absolute minimum friction on the return side of the belt, increasing belt life

WCX Series Models: 

WCX 1300: 13” belt width (33cm), 35′ (10.6m) length

• The WCX 1300 series offers entry level features with all the advantages of the larger WCX models. It can be top end powered electrically or hydraulically.
• This series is ideal when only a modest capacity is required, such as during seed grading and cleaning operations or transferring bagged grain to a bulk situation.
• Designed for semi portable situations when a forklift or other device can be used for repositioning.
• It features a collapsible canvas hopper and winch to adjust discharge height from 10.5 feet (3.2m) to 16.8 feet (5.12m). Ideal for truck loading when big capacity is not required.

WCX 1500: 15” belt width (38.1cm), lengths from 49′ (14.93m) up to 102’ (31m)

• The 1500 series starts with the WCX 1545FL (Field Loader). This model includes all the benefits of our standard hopper belt conveyors but features an extended low-profile hopper with unique collapsible design.
• The hopper on this conveyor is only 20” (50.8cm) wide so it is designed for high capacity truck loading from silos with closely spaced legs. It also features a heavy duty self propelled mover with four high flotation tyres.
• Combined with hydraulic lift, this conveyor is very versatile and manoeuvrable and can be used for truck loading, filling multiple small silos, or filling your air seeder with seed or fertiliser.
• It is powered with an electric start 32HP Kohler engine and features lights and a soft starter.
• The series is continued with a range of standard hopper belt conveyors, available in lengths from 67’ (20.4m) to 102’ (31m). These models are available in electric, PTO or petrol motor powered versions. Each model features a standard collapsible hopper and offers extra intake reach back into the silo so they can be used to fill and empty the silo.

WCX 2400: 23.5” belt width (59.6cm), lengths from 105’ (32m) up to 120’ (36.5m)

• These big 2400 series conveyors are an alternative to the largest of augers where there is a need for big capacity and zero damage silo filling to keep up with the fastest harvest or unloading situation.
• Available in 105’ (32m), 110’ (33.5m) and 120’ (36.5m) lengths, these conveyors can be PTO or electrically powered. They come standard with a large collapsible canvas hopper which alternatively can be fed with a low profile transfer conveyor, swing away conveyor or drive over hopper.
• The 2400 series features hydraulic lift and steel trussing to rigidly align the tube and prevent sag. Tow hitch is also standard.

Read less...

To contact Westfield Augers Australia about Belt Conveyors | WCX Series use Get a quote.