BLOX Industrial BP101060LO Profiled Safety ...

BLOX Industrial - BP101060LO Profiled Safety Support | Cribbing Blocks

Supplier: Safety MITS

BP101060LO Profiled Safety Support | Cribbing Blocks

BLOX Safety Supports and Jacking Blocks are proudly Australian Made using recycled high-density polyethylene (HDPE) / wood and polyurethane. Safety Supports and Jacking Blocks are the safer alternative to timber dunnage.

AUSTRALIAN MADE

The BP101060LO cup and cone jacking, and cribbing blocks are a purpose designed tool to replace unsafe timber blocks that had traditionally been used to stabilise machinery and equipment used repair and maintenance or storage. The cup and cone profile on two surfaces provides a secure base and top that interlock when stacked. This block is ideal for use when only a small profile height is required or when used to fill a small space when larger Blox jacking and cribbing blocks are used to stabilise equipment. As with all Blox family members, the top block of a stack can be flipped to provide a flat surface for jacking.

Blox jacking and support blocks are a safer alternative to timber dunnage and blocks used in jacking and stabilising task. Made from recycled plastic to a repeatable formula, strict manufacturing process and quality controls ensure product uniformity. Being made from recycled material is great for the environment and ensures the product meets full sustainability.

Certified load rated capacity
Working Load Limit (WLL)* 122kg/cm2
Tested under the guidance of AS1170.0.2002 and AS2498.3.1998
Comprehensive Technical Data Sheets (TDS) available
100% recycled high density polyethylene (HDPE) construction for durability
Lightweight
Resistant to fuels, oils and most common chemicals
Will not splinter or rot
Non-conductive
Sturdy lanyard for ease of handling
Operating Temperature range -40°C to +75°C
50 year warranty against splitting, rotting, absorption, termites and mould

* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the safety support/cribbing block.

Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets can be obtained by emailing [email protected] or calling 02 9838 8887.

To contact Safety MITS about BLOX Industrial BP101060LO Profiled Safety Support | Cribbing Blocks use Get a quote.

Certified load rated capacity
Working Load Limit (WLL)* 122kg/cm2
Tested under the guidance of AS1170.0.2002 and AS2498.3.1998
Comprehensive Technical Data Sheets (TDS) available
100% recycled high density polyethylene (HDPE) construction for durability
Lightweight
Resistant to fuels, oils and most common chemicals
Will not splinter or rot
Non-conductive
Sturdy lanyard for ease of handling
Operating Temperature range -40°C to +75°C
50 year warranty against splitting, rotting, absorption, termites and mould

* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the safety support/cribbing block.

Read less...

To contact Safety MITS about BLOX Industrial BP101060LO Profiled Safety Support | Cribbing Blocks use Get a quote.

AI Overview BETA

BLOX Industrial BP101060LO is a cribbing block for supporting and stabilising machinery during repair, maintenance or storage. Its cup-and-cone profiles interlock across two surfaces when stacked, forming a secure top and base. Use it where only a small support height is needed or to fill a gap alongside larger Blox jacking and cribbing blocks for stabilisation.

Total-block WLL: 122 kg/cm² for full, evenly distributed load across both surfaces
Tested under guidance of AS1170.0.2002 and AS2498.3.1998
100% recycled high-density polyethylene (HDPE) construction
50-year warranty against splitting, rotting, absorption, termites and mould
Operating temperature range: -40°C to +75°C

Source: listing by Safety MITS on IndustrySearch · Updated 5 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Safety MITS provide you with a quote

Supplier

Supplier: Safety MITS

Distribution: Australia, New Zealand & South East Asia

Location: Seven Hills, NSW

Customers: Rio Tinto, Hastings Deering, QAL, BHP, Toyota Materials Handling, JCB, Hitachi, Komatsu

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Safety MITS are also proudly displaying these credentials:

Established:

2010

Employees:

1-5

Customers:

Rio Tinto, Hastings Deering, QAL, BHP, Toyota Materials Handling, JCB, Hitachi, Komatsu

Memberships:

Singleton Chamber of Commerce

Certifications:

AS1170, AS2498

Distribution:

Australia, New Zealand & South East Asia