BLOX Industrial Wheel Risers for machinery ...

BLOX Industrial - Wheel Risers for machinery maintenance

Supplier: Safety MITS

Wheel Risers for machinery maintenance

1/2

The Wheel risers are designed for use during heavy vehicle, truck, bus, forklift and construction machinery maintenance and service operations where additional under vehicle height is needed.

FORKLIFT MAINTENANCE

42 Recent Views

The Wheel Risers are used to elevate trucks to above ground loading docks during loading and unloading operations.

Available in double and single 10° riser positions
Made of solid recycled HDPE materials
Eliminate unsafe, below dock loading conditions

* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the cribbing block.

Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets can be obtained by emailing [email protected] or calling 02 9838 8887.

For more information or a quote please call or use the IndustrySearch Email form for a fast reply.

To contact Safety MITS about BLOX Industrial Wheel Risers for machinery maintenance use Get a quote.

The Wheel Risers are used to elevate trucks to above ground loading docks during loading and unloading operations.

Available in double and single 10° riser positions
Made of solid recycled HDPE materials
Eliminate unsafe, below dock loading conditions

* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the cribbing block.

For more information or a quote please call or use the IndustrySearch Email form for a fast reply.

Read less...

To contact Safety MITS about BLOX Industrial Wheel Risers for machinery maintenance use Get a quote.

AI Overview BETA

BLOX Industrial Wheel Risers are solid supports made from recycled HDPE, designed to provide additional clearance during vehicle and machinery maintenance and service work. The single and double riser positions, each set at 10°, give crews two configurations for supporting equipment. Truck loading crews at above-ground docks use them to elevate trucks for loading and unloading operations.

WLL assumes a full press load evenly spread across both block surfaces
WLL excludes point loads and uneven weight distribution
Know the supported equipment’s weight; never exceed the maximum WLL
Consult manufacturer guidance for recommended blocking and lifting points
Perform a risk assessment before using the risers

Source: listing by Safety MITS on IndustrySearch · Updated 27 Oct 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Safety MITS provide you with a quote

Supplier

Supplier: Safety MITS

Distribution: Australia, New Zealand & South East Asia

Location: Seven Hills, NSW

Customers: Rio Tinto, Hastings Deering, QAL, BHP, Toyota Materials Handling, JCB, Hitachi, Komatsu

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Safety MITS are also proudly displaying these credentials:

Established:

2010

Employees:

1-5

Customers:

Rio Tinto, Hastings Deering, QAL, BHP, Toyota Materials Handling, JCB, Hitachi, Komatsu

Memberships:

Singleton Chamber of Commerce

Certifications:

AS1170, AS2498

Distribution:

Australia, New Zealand & South East Asia