BulletPro STD6246TAD 2 post clear floor ...

BulletPro - STD6246TAD 2 post clear floor lift 4.6 ton symmetrical or asymmetrical Price Guide: $5,500

Supplier: Interequip Pty Ltd

STD6246TAD 2 post clear floor lift 4.6 ton symmetrical or asymmetrical

1/6

The posts can installed asymmetrical (open car doors wider). or symmetric (more drive through width between the columns). Only 100 mm concrete depth required, Ultra low lift pad height.

lift 4.6 ton strong, quality great value

BulletPro STD6246TAD-H2 2 post clear floor lift 4.6 ton

Can be installed symmetrically or asymmetrically

Overrall hoist height 3862 mm

Lifting capacity 4600 kg

Manual lock release for unlock and lower down

Remote control for lock and lift up

Ultra low lift pad just 88 mm

Only 100 mm concrete depth required

Feature: Great Value for Money

The posts can installed asymmetrical (open car doors wider). or symmetric (more drive through width between the columns).

· The post design incorporates special Double S bends to increase column strength

· Top bar and top cross bar can be installed in narrow or wide, high or low setting

· 3 stage telescoping front arms and 2 stage rears arms,

· Comes with 80 mm load arm adaptors and holders, remote control for up and lock, rubber protectors mounted to the carriage , rubber column guards, remote control, tool trays on arms.

· Standard 3 phase or optional single phase motor

· The motor can be fitted in a high up position on the front of the post (out of the way) to save working space or close to wall

Spec

Lifting Capacity	4600kg
Max Lift height	1794 mm-1938 mm
Min. height	88mm
Motor standard: 3 phase 3.0kw 4 speed 1400 rpm or optional 240V 1 phase 2.2kw 2 speed 2800 rpm
Weight	750 kg
Overall height	3862 mm
Overall width - symmetrical install position	3436 mm
Overall width - asymmetrical install position	3501 mm
Lifting up time	45-58 sec
Noise level	75dB
Operation temperature	-10 to 40 °C

To contact Interequip Pty Ltd about BulletPro STD6246TAD 2 post clear floor lift 4.6 ton symmetrical or asymmetrical use Get a quote.

BulletPro STD6246TAD-H2 2 post clear floor lift 4.6 ton

Can be installed symmetrically or asymmetrically

Overrall hoist height 3862 mm

Lifting capacity 4600 kg

Manual lock release for unlock and lower down

Remote control for lock and lift up

Ultra low lift pad just 88 mm

Only 100 mm concrete depth required

Feature: Great Value for Money

The posts can installed asymmetrical (open car doors wider). or symmetric (more drive through width between the columns).

· The post design incorporates special Double S bends to increase column strength

· Top bar and top cross bar can be installed in narrow or wide, high or low setting

· 3 stage telescoping front arms and 2 stage rears arms,

· Comes with 80 mm load arm adaptors and holders, remote control for up and lock, rubber protectors mounted to the carriage , rubber column guards, remote control, tool trays on arms.

· Standard 3 phase or optional single phase motor

· The motor can be fitted in a high up position on the front of the post (out of the way) to save working space or close to wall

Spec

Lifting Capacity	4600kg
Max Lift height	1794 mm-1938 mm
Min. height	88mm
Motor standard: 3 phase 3.0kw 4 speed 1400 rpm or optional 240V 1 phase 2.2kw 2 speed 2800 rpm
Weight	750 kg
Overall height	3862 mm
Overall width - symmetrical install position	3436 mm
Overall width - asymmetrical install position	3501 mm
Lifting up time	45-58 sec
Noise level	75dB
Operation temperature	-10 to 40 °C

Read less...

To contact Interequip Pty Ltd about BulletPro STD6246TAD 2 post clear floor lift 4.6 ton symmetrical or asymmetrical use Get a quote.

BulletPro STD6246TAD-H2 Datasheet(4.13MB)

AI Overview BETA

The BulletPro STD6246TAD is a two-post clear-floor lift for raising and lowering vehicles, with a rated lifting capacity of 4,600 kg. Its posts can be installed asymmetrically, leaving more room for vehicle doors to open beside the lift. Automotive workshops handling low-clearance vehicles get an ultra-low starting pad for positioning the lift beneath them during service work.

Requires only 100 mm concrete depth
Maximum lift height: 1,794–1,938 mm
Standard 3-phase motor; optional 240 V single-phase motor
Three-stage telescoping front arms and two-stage rear arms
Includes 80 mm load-arm adaptors and holders, rubber guards and arm tool trays

Source: listing by Interequip Pty Ltd on IndustrySearch · Updated 31 Oct 2026
Specification sheet: BulletPro STD6246TAD-H2 Datasheet (PDF)

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Interequip Pty Ltd provide you with a quote

Supplier

Supplier: Interequip Pty Ltd

Distribution: Australia and New Zealand

Location: Tullamarine, VIC

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Interequip Pty Ltd are also proudly displaying these credentials:

Established:

2005

Employees:

6-20

Memberships:

AAAA

Distribution:

Australia and New Zealand

Location:

Tullamarine , VIC

Joined:

Oct 2021