Wheel Stops & Clamps Suppliers in Adelaide

Are used to prevent vehicles from rolling too far forward or backward by acting as a physical barrier that stops the wheels from moving any further. They are commonly used in parking lots, garages, and other areas where vehicles need to be parked or stored. Wheel stops can help to prevent accidents and damage to vehicles, as well as improve parking efficiency and organization.

Are not mandatory in all jurisdictions, but they can be a useful tool to prevent damage to vehicles and property. It is recommended to consult with local regulations and consider the needs of your parking lot before deciding whether to install wheel stops.

Are typically made of materials such as concrete, rubber, recycled plastic, or metal. Concrete is the most common material used for permanent installations, while rubber and recycled plastic are more commonly used for temporary installations or areas with less traffic. Metal wheel stops are also available, but are less common due to their higher cost and potential for damage to vehicles.

Wheel stops, also known as parking blocks or curb stops, are typically required in parking lots to prevent vehicles from rolling too far and damaging property or injuring pedestrians. The size requirements for wheel stops vary depending on local regulations and the specific application. Some jurisdictions may require larger or smaller wheel stops, depending on factors such as the slope of the parking lot, the type of vehicles using the lot, and the layout of the parking spaces. It is important to check with local authorities or consult a professional parking lot designer to determine the appropriate size and placement of wheel stops for a given project.

Wheel stops are an important component of a parking lot, as they help prevent vehicles from crossing over into pedestrian areas or damaging structures. The number of wheel stops needed for a parking lot depends on several factors, including the size of the lot, the number of parking spaces, and the layout of the area. Generally, a wheel stop should be placed at the end of each parking space, as well as at the end of the row to prevent vehicles from overhanging into traffic areas. The exact number of wheel stops required will depend on the specific needs of your parking lot, so it is important to consult with a professional to determine the appropriate amount.

Are relatively easy to install and can be done by a DIY enthusiast with some basic tools. Additionally, if the installation requires permits or approvals from local authorities, a professional may be necessary to navigate the process.

Are typically secured to the ground using bolts, anchors, or concrete. The method used will depend on the type of surface the wheel stop is being installed on, as well as the type of wheel stop being used.

• For asphalt surfaces, wheel stops can be secured using anchor bolts that are drilled directly into the pavement. For concrete surfaces, wheel stops can be secured using expansion anchors or wedge anchors that are embedded into the concrete.
• Another option for securing wheel stops is to pour a concrete pad around the base of the stop, providing a permanent and secure anchor point. This method is especially useful for areas with heavy vehicle traffic or where the wheel stops may be subject to impact.

Regardless of the method used, it is important to ensure that the wheel stops are anchored securely to prevent them from shifting or becoming dislodged, which could create a safety hazard.

Wheel stops are compliant with Australian regulations and standards, provided they meet certain requirements. According to Australian Standard AS2890.1:2004, wheel stops must be made of a durable material, have a minimum height of 100mm, and be painted with a highly visible contrasting color. They must also be securely anchored to the ground, and positioned so that vehicles do not overhang onto pedestrian areas. Additionally, wheel stops should be placed at the end of a parking space to prevent vehicles from hitting walls or barriers. Compliance with these regulations helps ensure the safety of drivers and pedestrians in parking areas.

Can cost anywhere from $10 to $100 per unit depending on the material, size, and manufacturer. The most common materials for wheel stops are concrete, rubber, and plastic. Concrete wheel stops are the most durable but also the most expensive, while rubber and plastic options are more affordable but may not last as long. The size of the wheel stop will also affect the cost, with larger options typically being more expensive.