Cadalpe Continuous Tartrate Stabilisation ...
Cadalpe Continuous Tartrate Stabilisation Plants
Save Refrigeration Power and Time using the Cadalpe contact tartrate plant. Set your temperature of your refrigeration unit to cellar temperatures and not minus 6 degrees!
This is a plug and play unit which comprises its own refrigeration unit, insulated crystallizer tank, plc control panel, conductivity meter, plate heat exchanger and filter to remove the crystals.
The continuous and automatic production allows tartrate stabilisation in 24 hours for small batches but the greatest refrigeration/power efficiency is created when very large tanks are stabilised over a 5 - 7 day working week.
Once the unit completes the start up process (usually 3 hours) the Cadalpe plant achieves a 95% power saving efficiency.
This is achieved in part due to the installed plate heat exchanger which allows counter current flow against the incoming product.
Contact time inside the crystallizer tank is 1.5 to 2 hours.
- C30 models available with productions of 5000, 7500, 10000, 12500, 15000 and 20000 litres per hour.
- C36 models available with productions of 1200 and 2500 litres per hour.
To contact ABEVE about Cadalpe Continuous Tartrate Stabilisation Plants use Get a quote.
This is a plug and play unit which comprises its own refrigeration unit, insulated crystallizer tank, plc control panel, conductivity meter, plate heat exchanger and filter to remove the crystals.
The continuous and automatic production allows tartrate stabilisation in 24 hours for small batches but the greatest refrigeration/power efficiency is created when very large tanks are stabilised over a 5 - 7 day working week.
Once the unit completes the start up process (usually 3 hours) the Cadalpe plant achieves a 95% power saving efficiency.
This is achieved in part due to the installed plate heat exchanger which allows counter current flow against the incoming product.
Contact time inside the crystallizer tank is 1.5 to 2 hours.
- C30 models available with productions of 5000, 7500, 10000, 12500, 15000 and 20000 litres per hour.
- C36 models available with productions of 1200 and 2500 litres per hour.
To contact ABEVE about Cadalpe Continuous Tartrate Stabilisation Plants use Get a quote.
The Cadalpe Continuous Tartrate Stabilisation Plants continuously treat product to remove tartrate crystals through an automatic process. Its plate heat exchanger creates counter-current flow against incoming product, contributing to 95% power saving once start-up is complete. For operations treating very large tanks, greatest refrigeration and power efficiency comes from stabilising them across a working week.
- Production options span 1,200–20,000 L/h across C30 and C36 models
- Start-up usually takes 3 hours
- Small batches stabilise in 24 hours
- Set refrigeration to cellar temperatures, rather than −6 degrees
- Includes refrigeration unit, insulated crystallizer, PLC panel, conductivity meter and crystal filter
Source: listing by ABEVE on IndustrySearch · Updated 1 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by ABEVE on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Albrigi Battonage Tank
Sraml Semi Automatic Bottle Filler
Reda PolyPhenol Extractors
Cadalpe Ion Exchange with Resins
Cadalpe Continuous Tartrate Stabilisation Plants
Rotary Drum Vacuum Filter | Cadalpe (RDV)
Abeve Vibrating Hoppers
Armbruster RotoVib Destemmer
Merlin Pneumatic Press
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales