CEM Temperature Calibrator | Dry-Well | ...

CEM - Temperature Calibrator | Dry-Well | CEM BX-150

Supplier: TMG Test Equipment

Temperature Calibrator | Dry-Well | CEM BX-150

1/2

The new heat source to check your thermometer’s accuracy up to 300°C/572°F. Simply set the heat source to the desired test point, insert the test probe into the best fitting well, and get a verification of the performance. It’s that easy!

In Stock

Product Features:

The new heat source to check your thermometer’s accuracy up to 300°C/572°F. Simply set the heat source to the desired test point, insert the test probe into the best fitting well, and get a verification of the performance. It’s that easy!
The dry-block heat sources allow users to check the accuracy of the thermometers and sensors as a system, on site, without the need for heavy, expensive equipment. The dryblocks are high accuracy, portable heat sources that are extremely easy to use. Simply plug in, switch ON and set the dry-block to the temperature that you wish to test, insert your probe into the correct size well and record the reading of your thermometer and probe to the displayed temperature of the dry-block and the difference is the error of your instrument. For optimum accuracy and UKAS traceability use a reference thermometer to make comparison measurements.
The blocks are controlled by a closed loop microprocessor based digital PID temperature controller system incorporating a heater and precision platinum RTD sensor house in the aluminium block. Fan cooling allows rapid changes in block temperature upon demand. The required temperature may be adjusted in 0.1°C increments across the range of the instrument using the buttons on the front panel.
These units are ideal for use in a variety of industrial and process applications. Each unit is supplied with a traceable certification of calibration showing actual test data, which can be used as part of quality assurance programmes.

Accessories:

BX 150 dry-block heat sources
Power Cord
User’s Guide
Calibration Report

To contact TMG Test Equipment about CEM Temperature Calibrator | Dry-Well | CEM BX-150 use Get a quote.

Product Features:

The new heat source to check your thermometer’s accuracy up to 300°C/572°F. Simply set the heat source to the desired test point, insert the test probe into the best fitting well, and get a verification of the performance. It’s that easy!
The dry-block heat sources allow users to check the accuracy of the thermometers and sensors as a system, on site, without the need for heavy, expensive equipment. The dryblocks are high accuracy, portable heat sources that are extremely easy to use. Simply plug in, switch ON and set the dry-block to the temperature that you wish to test, insert your probe into the correct size well and record the reading of your thermometer and probe to the displayed temperature of the dry-block and the difference is the error of your instrument. For optimum accuracy and UKAS traceability use a reference thermometer to make comparison measurements.
The blocks are controlled by a closed loop microprocessor based digital PID temperature controller system incorporating a heater and precision platinum RTD sensor house in the aluminium block. Fan cooling allows rapid changes in block temperature upon demand. The required temperature may be adjusted in 0.1°C increments across the range of the instrument using the buttons on the front panel.
These units are ideal for use in a variety of industrial and process applications. Each unit is supplied with a traceable certification of calibration showing actual test data, which can be used as part of quality assurance programmes.

Accessories:

BX 150 dry-block heat sources
Power Cord
User’s Guide
Calibration Report

Read less...

To contact TMG Test Equipment about CEM Temperature Calibrator | Dry-Well | CEM BX-150 use Get a quote.

TMG_CEM_BX-150(0.54MB)

AI Overview BETA

The CEM BX-150 is a dry-well temperature calibrator for checking thermometer accuracy, with a working range up to 300°C. A fan brings the aluminium block to a different test temperature quickly when required. Industrial and process teams can use it on site to compare thermometers and sensors as a system without bringing heavy, expensive equipment.

Closed-loop digital PID temperature controller
Aluminium block contains a heater and precision platinum RTD sensor
Temperature adjusts in 0.1°C steps across the instrument’s range
For optimum accuracy and UKAS traceability, compare readings with a reference thermometer
Supplied with traceable calibration certification showing actual test data

Source: listing by TMG Test Equipment on IndustrySearch · Updated 2 Nov 2026
Supplier document: TMG_CEM_BX-150 (PDF)

AI Overview is generated by artificial intelligence and may contain mistakes.

Let TMG Test Equipment provide you with a quote