The Cygnus Mini ROV thickness gauge can be mounted onto small inspection class ROV's. It can be used to inspect inside pipelines and other difficult to reach places where it is too dangerous for divers to go. It is also ideal for taking thickness measurements on ships hulls at the same time as doing a visual inspection.
Pressure tested to 500m.
Small, lightweight and easy to install.
Optionally dedicated probe holder to allow measurements on curved or flat surfaces
Supplied with CygLink software to display and log thickness measurements from the ROV on a computer at the surface which can be saved to a file and printed out.
CygLink has two data logging facilities: Quick Log for simple recording of thickness measurements and Structured mode with four templates available - Single Point, Multi-Point, GridPoint and Key Point.
The Cygnus Top Side Repeater (TSR) is available as an option and has the facility to display the thickness measurements remotely and overlay them on to a video signal. This allows the measurements to be superimposed on the ROV camera’s monitor screen.
Easy calibration at the surface via CygLink software or Top Side Repeater (TSR) unit.
Only one twisted pair is required to transfer the data to the surface.
Deep Water Pipeline Inspection
Pier & Piling Inspection
Materials: Sound velocities between 1000 to 9995 m/s, 3mm - 250mm with 2.25 MHz probe
Range in steel: 2mm - 150mm with 3.5 MHz probe, 1mm - 50mm with 5 MHz probe
Accuracy: ± 0.05mm
Resolution: 0.05mm, Single crystal soft-faced compression remote probe.
Probes: 13mm - 2.25, 3.5 or 5MHz, 19mm - 2.25 MHz
Power: 7.0 - 30V DC @ 150mA (max)
Size: 160mm x 62mm
Weight in air: 550g
Operating Temperature: -10°C to 50°C
Communication: RS-422, Simplex Single Pair, 2400 Baud
Russell Fraser Sales NDT | Inspection, NDT & Testing Equipment
Russell Fraser Sales Pty Ltd supplies inspection, NDT and testing equipment to Engineering, Construction, NDT, Aerospace, Marine and Diving industries primarily throughout Australia, New Zealand and ...