Digital Ultrasonic Flaw Detector | Tru-Test ...

Digital Ultrasonic Flaw Detector | Tru-Test

Tru-Test hand held and light weight Digital Ultrasonic Flaw Detector offers you all the features of larger, heavier instruments, such as high resolution with the usual high gain reserve.

32 Recent Views In Stock

In addition to this, Tru-Test includes many extra features to help make your work easier. For example, in weld testing the exact flaw location is evaluated; all features are available for demanding thickness measurements. User-friendly programs for display evaluation with 3 or 4 Distance Amplitude Curves (DAC), +6dB DAC and for AVG evaluation are available as standard.

T-Scan thickness display and optional Encoder B-Scan scanner.
Welding section display defect location for report printing.
Tru-Test is very light weight - 2.0kg, including batteries.

Specifications

Calibration range: From 25 to 5000 mm (steel long).
Sound velocity:2 fixed values(3230m/s,5920m/s) and adjustable in the range 1000 to 9999m/s in steps of 1m/s.
Probe delay: 0 to 365 µs
Gain: 100dB, adjustable in steps of 0.1/2/6/12/20 dB
Fine Gain:0.1 dB
Frequency range:0.5-4 MHz narrow band, 5-15 MHz wide band
Pulse repetition frequency: 10-1000Hz, depending on the set calibration range and the probe delay for adjustable.
Test methods:Pulse echo mode and Thru mode
Pulser Voltage:200 / 400 V negative spike
Damping:100 / 200 ?
Echo presentation:Full wave, RF
Suppression:Linear, 0 to 90% screen height adjustable in steps of 1%, status indication on the display
DAC: Recording of up to 8 reference echoes, 40dB dynamic range, display of the DAC curve.
Data storage:1000 A-scan Trace Data sets in the FLASH memory, with additional alphanumeric identification and directory function.
Units of measure: mm or inch
Direct documentation: Hardcopy (contents of display), active measurement reading, test report or thickness report, via the RS-232 interface to computer.
Interface:RS-232 C (bidirectional) or USB adaptor for PC computer.
Analog output:Proportional voltage for amplitude and sound path of the echo in the gate; TTL signal for gate alarm
Probe connector:Two LEMO 1 connectors ( BNC connector available )
Power supply: Removable 8800mAh/7.2V Li-ion Battery or mains supply via an external mains power/charger unit JBD15-A2S
Operational period:Up to 5 hours with Battery ( select LCD low bright )
Battery charge indication:On the display

To contact Australian NDT Sales about Digital Ultrasonic Flaw Detector | Tru-Test use Get a quote.

T-Scan thickness display and optional Encoder B-Scan scanner.
Welding section display defect location for report printing.
Tru-Test is very light weight - 2.0kg, including batteries.

Specifications

Calibration range: From 25 to 5000 mm (steel long).
Sound velocity:2 fixed values(3230m/s,5920m/s) and adjustable in the range 1000 to 9999m/s in steps of 1m/s.
Probe delay: 0 to 365 µs
Gain: 100dB, adjustable in steps of 0.1/2/6/12/20 dB
Fine Gain:0.1 dB
Frequency range:0.5-4 MHz narrow band, 5-15 MHz wide band
Pulse repetition frequency: 10-1000Hz, depending on the set calibration range and the probe delay for adjustable.
Test methods:Pulse echo mode and Thru mode
Pulser Voltage:200 / 400 V negative spike
Damping:100 / 200 ?
Echo presentation:Full wave, RF
Suppression:Linear, 0 to 90% screen height adjustable in steps of 1%, status indication on the display
DAC: Recording of up to 8 reference echoes, 40dB dynamic range, display of the DAC curve.
Data storage:1000 A-scan Trace Data sets in the FLASH memory, with additional alphanumeric identification and directory function.
Units of measure: mm or inch
Direct documentation: Hardcopy (contents of display), active measurement reading, test report or thickness report, via the RS-232 interface to computer.
Interface:RS-232 C (bidirectional) or USB adaptor for PC computer.
Analog output:Proportional voltage for amplitude and sound path of the echo in the gate; TTL signal for gate alarm
Probe connector:Two LEMO 1 connectors ( BNC connector available )
Power supply: Removable 8800mAh/7.2V Li-ion Battery or mains supply via an external mains power/charger unit JBD15-A2S
Operational period:Up to 5 hours with Battery ( select LCD low bright )
Battery charge indication:On the display