Evident Ultrasonic Flaw Detector 3x Faster ...

Evident - Ultrasonic Flaw Detector 3x Faster TFM Acquisition Rate | OmniScan X4

Supplier: Evident Australia

Ultrasonic Flaw Detector 3x Faster TFM Acquisition Rate | OmniScan X4

Detect and interpret challenging flaws and identify damage earlier with the powerful, yet portable OmniScan™ X4 multitechnology flaw detector.

3x Faster TFM Acquisition Rate

Receive 1-3 days from order

Exploit its versatile PA, faster TFM, innovative PCI, and efficient twin TFM/PCI to perform rapid and reliable inspections of welds and components.

Be Ready for What’s Next: OmniScan X4 Flaw Detector

A portable yet powerful solution, the speed and versatility of the OmniScan™ X4 multitechnology series boosts your productivity while increasing confidence in your assessments. Exploit its advanced phased array capabilities, efficient total focusing method (TFM), and innovative phase coherence imaging (PCI) to detect and interpret challenging flaws and secure the integrity of your assets by identifying damage earlier.

Proven to Perform, Trusted to Deliver

Each OmniScan X4 unit is a complete multitechnology inspection toolbox, enabling you to exploit multiple ultrasonic testing techniques. Leverage its detection and measurement capabilities to accurately identify and evaluate the severity of damage before it becomes critical, protecting welds, components, and assets most susceptible to cracking or corrosion.

Assess with Certainty Using PCI

Eliminate doubt through phase coherence imaging’s capacity to detect and accentuate historically difficult-to-detect flaws, including hook cracks and stress corrosion cracking (SCC). Use PCI to clearly distinguish individual flaws in colonies of fine cracks and characterize them with certainty.

3x Faster TFM Acquisition Rate

Obtain crisp TFM imaging at up to three times faster* acquisition rates than the predecessor model (X3 64) thanks to the OmniScan X4 series’ improved processing power. Exploit the increased speed and 128-element capacity of the OmniScan X4 64:128PR unit to perform TFM inspections with extended focusing capabilities.

*Achieving this speed depends on the configuration and the use of sparse firing. Inquire for more details.

Gain Instant Insights and Eliminate Inefficiency

Twice the Confidence with Twin TFM and PCI

Exploit the individual attributes of PCI and TFM to thoroughly investigate the volume of welds from both sides simultaneously. Use two probes to scan the weld in one pass, displaying TFM and PCI results to compare, measure, and confirm your characterization of indications with efficiency and precision.

Engineered for Speed and Simplicity

Performing phased array, TOFD, TFM, and PCI is straightforward and intuitive on the OmniScan X4 series. Inspectors of any experience level can exploit these techniques with increased efficiency and more confidence utilizing the simple step-by-step scan plan and application presets.

Convenient Application Presets

Improve the learning curve and increase the reliability and consistency of inspections between operators with the OmniScan X4 application presets. Even low-level users and new users can produce an optimal PA or PCI configuration within minutes.

With options for corrosion and composite inspections, these preprogrammed parameters simplify scanning setups using HydroFORM™, FlexoFORM™, and RollerFORM™ scanners, and you can adjust the settings as needed.

Ease Complex Configurations

The OmniScan X4 scan plan’s intuitive step-by-step 3D graphics ease your inspection setups, from the most basic to the most complex.

When setting up your raster scan plan, the scan axes can be customed named and you can create a datum reference point relative to the asset. These real-world references as well as the true orientation correction, greatly ease the creation of an intuitive schematic representation of the inspection data for your report.

Applications

Choose the Right Model for Your Application

Each model of the OmniScan X4 series has the capability to drive probes with a certain number of elements, offering varying focusing capabilities for different materials and thicknesses. Here is an overview of the types of applications that the four models are most proficient at performing. Contact us or your Evident representative for more details.

16:64PR

16:128PR

32:128PR

64:128PR

Excels at the following applications:

Corrosion monitoring
Pipeline integrity
Manual PA/TFM
TOFD
Small piping

Excellent mid-range model for:

Thin weld ( 25 mm)
Wind blade manufacturing
Aerospace flaw detection

Enables high-productivity weld inspection including coarse-grained materials:

Thick welds, up to ~75 mm
Austenitic/CRA
Occasional TFM
Oil and gas

Higher-productivity weld inspection in thicker, coarse-grained materials:

Very thick welds, ~100 mm (using a 64-element aperture to improve sizing accuracy)
Austenitic/CRA
Intensive TFM (HTHA)
Advanced oil and gas and power gen
FMC collection and application development

HTHA Inspection Solutions

OmniScan™ X4 Phased Array Flaw Detector with TFM and PCI

Detect and Define Smaller HTHA Cracks

Detecting HTHA early and reliably is so challenging that multiple inspection methods are often used in conjunction to maximize the probability of detection. Time-of-flight diffraction (TOFD), along with focused phased array (PA) and the total focusing method (TFM), especially using Dual Linear Array™ (DLA) probes, have shown to be particularly effective inspection techniques for this application.

OmniScan™ X4 flaw detector fully supports these methods, as well as innovative phase coherence imaging (PCI), which enhances small flaws and crack tips. OmniScan X4 instruments also offer a variety of onboard software tools to ease your setup and analysis workflow.

Integrated DLA probe configuration and scanner configuration
High-resolution TFM images (up to 1024 × 1024 points)
Software tools to optimize the TFM inspection process, from setup to analysis (scan plan with AIM model, automatic TCG, sparse firing, soft gain and palette slider, live TFM envelope and image filters, gates, and alarms)
64-element TFM aperture and 128-element extended TFM aperture (OmniScan X4 64:128PR model)
Phase coherence imaging to enhance small defects and crack tips (all OmniScan X4 units)
Acquire up to 8 TOFD and phased array groups simultaneously for efficient screening
Acquire and display up to 4 TFM and PCI groups at once
Plane wave imaging (PWI) available with TFM and PCI (using the OmniScan X4 unit with linear array probes)

Weld Solutions

OmniScan™ X4 Phased Array Flaw Detector

Get the Most Out of Your Inspection

The Omniscan X4 flaw detector is a comprehensive multitechnology toolbox, equipped with setup, imaging, and analysis to tools that make weld inspection easier

Do your complete setup using the intuitive onboard scan plan without having to use a PC
Improved fast calibration
Enhanced image resolution and geometrically correct flaw representation with multigroup total focusing method (TFM) imaging and phase coherence imaging (PCI)
Twin TFM/PCI images the volume of welds from both sides, using two probes, displaying TFM and PCI data simultaneously on the display
Standard PR configuration enables the use of larger apertures on dual array probes (up to 128-element extended TFM aperture with the 64:128PR model)

The OmniScan X4 flaw detector excels at a broad range of weld inspection applications, including:

In-service and construction welding
Pressure vessels
Process pipes
Boiler tubes
Pipeline
Wind tower
Structural construction
Corrosion-resistant alloys and cladded materials (austenitic, nickel, and other coarse-grained materials)

Specifications:

General and Enclosure
Size	335 mm × 221 mm × 151 mm (13.2 in. × 8.7 in. × 5.9 in.)
Weight	5.7 kg (with 1 battery) for model 16:64PR 5.9 kg (with 1 battery) for models 16:128PR, 32:128PR, and 64:128PR
Onboard Storage	1 TB internal SSD storage. Maximum 25 GB individual file size. Storage extensible using external USB drive
Storage Devices	SDHC and SDXC cards, or most standard USB storage devices
Wireless	Wi-Fi® 6E and Bluetooth® 5.3 onboard
PAUT Connectors	1 PA connector, 2x UT channels (2 P/R connectors each)
Available Configurations and Groups	OmniScan X4A – 64 :128PR : 8 groups OmniScan X4A – 32 :128PR : 8 groups OmniScan X4A – 16 :128PR: 8 groups OmniScan X4B – 16 :64PR: 2 groups (PA, UT, or TFM) or a specific configuration of 2 PA groups + 1 TOFD
Drop Testing	Drop-tested according to MIL-STD-810G
Ingress Protection Rating	IP65 Certified (completely protected against dust and water jets from all directions (6.3mm nozzle))
Display	269 mm (10.6 in.) TFT LCD with resistive touch screen, 1280 × 768 pixels
Battery	2 hot-swappable Lithium-ion batteries included, 87 Wh each
Battery Life	Minimum of 5 hours (using ISO18563 standard setup parameters)
Operating Temperature	−10 to 45 °C (14 °F to 113 °F)
Storage Temperature	−20 °C to 60 °C (−4 °F to 140 °F) (with battery inside) −20 °C to 70 °C (−4 °F to 158 °F) (with no battery inside)

Inputs and Outputs
Ports	2x USB 3.1, 1x video out (HDMI), 1x SDHC memory card slot, 1x communication (Ethernet)
Encoders	2-axis encoder line (quadrature or clock/direction)
Digital Inputs and Outputs	4 digital inputs (TTL), 4 digital outputs (TTL) including one reserved for acquisition on/off
External DC Supply	18 VDC, circular 2.5 mm diameter connector, center-positive

General Ultrasonic Specifications
Effective Digitizing Frequency	Up to 100 MHz; User-adjustable compression factor
Maximum Pulse Repetition Rate (PRF)	Up to 20 kHz; Actual maximum PRF is often limited by physics (the time of flight required to obtain the ultrasonic signals)
Maximum Number of A-Scan Data Points	Up to 16,384
A-Scan Bit Depth	16 bits
Rectification	RF, full wave, half wave+, half wave−
Video Filtering	Smoothing (adjusted to the probe frequency range)
Filtering	PA channel: selection of band-pass filters, high-pass filters, and averaging UT channel: selection of low-pass filters, band-pass filters, high-pass filters, and averaging
Time-Corrected Gain (TCG)	PA: 40 dB per step of min. 0.1 dB UT: 100 dB per step of min. 0.1 dB Maximum slope of 40 dB/10 ns
Supported Beam Types (Groups)	Selection of phased array ultrasonics (PAUT) beam types (linear, sectorial, and compound), single ultrasonic beam (UT), time-of-flight-diffraction ultrasonics (TOFD), total focusing method (TFM), phase coherence imaging (PCI), full matrix capture (FMC), and plane wave imaging (PWI)
Raw Full Matrix Capture (FMC) Data Collection	Available only with model 64:128PR when using the NDT Device API or the OmniScan Black Box onboard application used with external acquisition software

Acoustic Specifications
Acoustic Specifications		PA Channel	UT Channels
Certification	Calibration Certification	ISO 18563-1:2022	EN22232:2020
Pulse Width	Adjustable from 30 ns to 1000 ns; resolution of 5 ns (half period of bipolar pulse or duration of negative pulse)	Adjustable from 30 ns to 1,000 ns; resolution of 2.5 ns
Pulse Width	Pulse Shape	Bipolar negative-positive square pulse	Negative square pulse
Receiver	Gain Range	0 dB to 80 dB; maximum input signal 900 mVp-p (full-screen height).	0 dB to 120 dB; maximum input signal 30 Vp-p (full-screen height)
Receiver	System Bandwidth	0.2 MHz to 26.5 MHz	0.25 MHz to 28.5 MHz

PAUT Specifications
OmniScan X4 Variant	64:128PR	32:128PR	16:128PR	16:64PR
Maximum Pulsing Aperture	64	32	16	16
Maximum Number of Receiving Channels	128	128	128	64
Number of Focal Laws	1024 maximum total (512 maximum per group)

FMC / TFM / PCI / PWI Specifications
OmniScan X4 Variant	64:128PR	32:128PR	16:128PR	16:64PR
Maximum Extended Aperture (FMC)	128	64	32	32
Maximum Aperture (PWI)	64	32	16	16
Maximum TFM or PCI Groups	4	4	4	2
Live TFM Envelope	Yes – Actual Hilbert Transform
Image Resolution	Up to 1024 × 1024 (1M points) for each TFM or PCI wave set
FMC Supported Wave Sets (TFM or PCI Modes)	Pulse-Echo: L-L, T-T, and TT-TT Self-Tandem: TT-T, TT-TTT, LL-L, LT-T, TL-T, TT-L, and TL-L
PWI Supported Wave Sets (TFM or PCI Modes)	Pulse-Echo: L-L and T-T

To contact Evident Australia about Evident Ultrasonic Flaw Detector 3x Faster TFM Acquisition Rate | OmniScan X4 use Get a quote.

Exploit its versatile PA, faster TFM, innovative PCI, and efficient twin TFM/PCI to perform rapid and reliable inspections of welds and components.

Be Ready for What’s Next: OmniScan X4 Flaw Detector

Proven to Perform, Trusted to Deliver

Assess with Certainty Using PCI

3x Faster TFM Acquisition Rate

*Achieving this speed depends on the configuration and the use of sparse firing. Inquire for more details.

Gain Instant Insights and Eliminate Inefficiency

Twice the Confidence with Twin TFM and PCI

Engineered for Speed and Simplicity

Convenient Application Presets

Ease Complex Configurations

The OmniScan X4 scan plan’s intuitive step-by-step 3D graphics ease your inspection setups, from the most basic to the most complex.

Applications

Choose the Right Model for Your Application

16:64PR

16:128PR

32:128PR

64:128PR

Excels at the following applications:

Corrosion monitoring
Pipeline integrity
Manual PA/TFM
TOFD
Small piping

Excellent mid-range model for:

Thin weld ( 25 mm)
Wind blade manufacturing
Aerospace flaw detection

Enables high-productivity weld inspection including coarse-grained materials:

Thick welds, up to ~75 mm
Austenitic/CRA
Occasional TFM
Oil and gas

Higher-productivity weld inspection in thicker, coarse-grained materials:

Very thick welds, ~100 mm (using a 64-element aperture to improve sizing accuracy)
Austenitic/CRA
Intensive TFM (HTHA)
Advanced oil and gas and power gen
FMC collection and application development

HTHA Inspection Solutions

OmniScan™ X4 Phased Array Flaw Detector with TFM and PCI

Detect and Define Smaller HTHA Cracks

Integrated DLA probe configuration and scanner configuration
High-resolution TFM images (up to 1024 × 1024 points)
Software tools to optimize the TFM inspection process, from setup to analysis (scan plan with AIM model, automatic TCG, sparse firing, soft gain and palette slider, live TFM envelope and image filters, gates, and alarms)
64-element TFM aperture and 128-element extended TFM aperture (OmniScan X4 64:128PR model)
Phase coherence imaging to enhance small defects and crack tips (all OmniScan X4 units)
Acquire up to 8 TOFD and phased array groups simultaneously for efficient screening
Acquire and display up to 4 TFM and PCI groups at once
Plane wave imaging (PWI) available with TFM and PCI (using the OmniScan X4 unit with linear array probes)

Weld Solutions

OmniScan™ X4 Phased Array Flaw Detector

Get the Most Out of Your Inspection

The Omniscan X4 flaw detector is a comprehensive multitechnology toolbox, equipped with setup, imaging, and analysis to tools that make weld inspection easier

Do your complete setup using the intuitive onboard scan plan without having to use a PC
Improved fast calibration
Enhanced image resolution and geometrically correct flaw representation with multigroup total focusing method (TFM) imaging and phase coherence imaging (PCI)
Twin TFM/PCI images the volume of welds from both sides, using two probes, displaying TFM and PCI data simultaneously on the display
Standard PR configuration enables the use of larger apertures on dual array probes (up to 128-element extended TFM aperture with the 64:128PR model)

The OmniScan X4 flaw detector excels at a broad range of weld inspection applications, including:

In-service and construction welding
Pressure vessels
Process pipes
Boiler tubes
Pipeline
Wind tower
Structural construction
Corrosion-resistant alloys and cladded materials (austenitic, nickel, and other coarse-grained materials)

Specifications:

General and Enclosure
Size	335 mm × 221 mm × 151 mm (13.2 in. × 8.7 in. × 5.9 in.)
Weight	5.7 kg (with 1 battery) for model 16:64PR 5.9 kg (with 1 battery) for models 16:128PR, 32:128PR, and 64:128PR
Onboard Storage	1 TB internal SSD storage. Maximum 25 GB individual file size. Storage extensible using external USB drive
Storage Devices	SDHC and SDXC cards, or most standard USB storage devices
Wireless	Wi-Fi® 6E and Bluetooth® 5.3 onboard
PAUT Connectors	1 PA connector, 2x UT channels (2 P/R connectors each)
Available Configurations and Groups	OmniScan X4A – 64 :128PR : 8 groups OmniScan X4A – 32 :128PR : 8 groups OmniScan X4A – 16 :128PR: 8 groups OmniScan X4B – 16 :64PR: 2 groups (PA, UT, or TFM) or a specific configuration of 2 PA groups + 1 TOFD
Drop Testing	Drop-tested according to MIL-STD-810G
Ingress Protection Rating	IP65 Certified (completely protected against dust and water jets from all directions (6.3mm nozzle))
Display	269 mm (10.6 in.) TFT LCD with resistive touch screen, 1280 × 768 pixels
Battery	2 hot-swappable Lithium-ion batteries included, 87 Wh each
Battery Life	Minimum of 5 hours (using ISO18563 standard setup parameters)
Operating Temperature	−10 to 45 °C (14 °F to 113 °F)
Storage Temperature	−20 °C to 60 °C (−4 °F to 140 °F) (with battery inside) −20 °C to 70 °C (−4 °F to 158 °F) (with no battery inside)

Inputs and Outputs
Ports	2x USB 3.1, 1x video out (HDMI), 1x SDHC memory card slot, 1x communication (Ethernet)
Encoders	2-axis encoder line (quadrature or clock/direction)
Digital Inputs and Outputs	4 digital inputs (TTL), 4 digital outputs (TTL) including one reserved for acquisition on/off
External DC Supply	18 VDC, circular 2.5 mm diameter connector, center-positive

General Ultrasonic Specifications
Effective Digitizing Frequency	Up to 100 MHz; User-adjustable compression factor
Maximum Pulse Repetition Rate (PRF)	Up to 20 kHz; Actual maximum PRF is often limited by physics (the time of flight required to obtain the ultrasonic signals)
Maximum Number of A-Scan Data Points	Up to 16,384
A-Scan Bit Depth	16 bits
Rectification	RF, full wave, half wave+, half wave−
Video Filtering	Smoothing (adjusted to the probe frequency range)
Filtering	PA channel: selection of band-pass filters, high-pass filters, and averaging UT channel: selection of low-pass filters, band-pass filters, high-pass filters, and averaging
Time-Corrected Gain (TCG)	PA: 40 dB per step of min. 0.1 dB UT: 100 dB per step of min. 0.1 dB Maximum slope of 40 dB/10 ns
Supported Beam Types (Groups)	Selection of phased array ultrasonics (PAUT) beam types (linear, sectorial, and compound), single ultrasonic beam (UT), time-of-flight-diffraction ultrasonics (TOFD), total focusing method (TFM), phase coherence imaging (PCI), full matrix capture (FMC), and plane wave imaging (PWI)
Raw Full Matrix Capture (FMC) Data Collection	Available only with model 64:128PR when using the NDT Device API or the OmniScan Black Box onboard application used with external acquisition software

Acoustic Specifications
Acoustic Specifications		PA Channel	UT Channels
Certification	Calibration Certification	ISO 18563-1:2022	EN22232:2020
Pulse Width	Adjustable from 30 ns to 1000 ns; resolution of 5 ns (half period of bipolar pulse or duration of negative pulse)	Adjustable from 30 ns to 1,000 ns; resolution of 2.5 ns
Pulse Width	Pulse Shape	Bipolar negative-positive square pulse	Negative square pulse
Receiver	Gain Range	0 dB to 80 dB; maximum input signal 900 mVp-p (full-screen height).	0 dB to 120 dB; maximum input signal 30 Vp-p (full-screen height)
Receiver	System Bandwidth	0.2 MHz to 26.5 MHz	0.25 MHz to 28.5 MHz

PAUT Specifications
OmniScan X4 Variant	64:128PR	32:128PR	16:128PR	16:64PR
Maximum Pulsing Aperture	64	32	16	16
Maximum Number of Receiving Channels	128	128	128	64
Number of Focal Laws	1024 maximum total (512 maximum per group)

FMC / TFM / PCI / PWI Specifications
OmniScan X4 Variant	64:128PR	32:128PR	16:128PR	16:64PR
Maximum Extended Aperture (FMC)	128	64	32	32
Maximum Aperture (PWI)	64	32	16	16
Maximum TFM or PCI Groups	4	4	4	2
Live TFM Envelope	Yes – Actual Hilbert Transform
Image Resolution	Up to 1024 × 1024 (1M points) for each TFM or PCI wave set
FMC Supported Wave Sets (TFM or PCI Modes)	Pulse-Echo: L-L, T-T, and TT-TT Self-Tandem: TT-T, TT-TTT, LL-L, LT-T, TL-T, TT-L, and TL-L
PWI Supported Wave Sets (TFM or PCI Modes)	Pulse-Echo: L-L and T-T

Read less...

To contact Evident Australia about Evident Ultrasonic Flaw Detector 3x Faster TFM Acquisition Rate | OmniScan X4 use Get a quote.

AI Overview BETA

Evident’s OmniScan X4 is a portable ultrasonic flaw detector for inspecting welds and components using several testing methods. Phase coherence imaging (PCI) highlights hard-to-detect flaws, including hook cracks and stress corrosion cracking, so inspectors can separate individual flaws in fine-crack colonies. For weld inspections, twin TFM/PCI uses two probes to scan both sides in one pass and display results for comparison.

TFM acquisition: up to 3x faster than X3 64 (configuration and sparse-firing dependent)
64:128PR supports a 64-element pulsing aperture and 128 receiving channels
Up to 1024 x 1024 points per TFM or PCI wave set
Two 87 Wh hot-swappable lithium-ion batteries included
Minimum 5 hours’ battery life using ISO 18563 standard setup parameters

Source: listing by Evident Australia on IndustrySearch · Updated 1 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Evident Australia provide you with a quote

Supplier

Supplier: Evident Australia

Distribution: Australia, New Zealand, Pacific Islands

Location: Macquarie Park, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Evident Australia are also proudly displaying these credentials:

Established:

2022

Employees:

6-20

Certifications:

ISO9001

Distribution:

Australia, New Zealand, Pacific Islands

Location:

Macquarie Park , NSW

Joined:

May 2025