Double Girder EOT Overhead Crane | Winch ...

Double Girder EOT Overhead Crane | Winch | Lifting Capacity 10t-300t

Supplier: Hydromech Hoist and Crane

1/4

This type overhead crane is an ideal solution for high work duty, fast lifting speed, and high safety request condition.

European standard winch

Receive 1-3 days from order

Double Girder Overhead crane with winch is a customized type overhead crane for high request scenario. NANTE can provide from M4 to M8 classification group, 2m-40m/min lifting speed to meet customer’s different requirement. Nante’s double girder overhead crane with winch has the features of reasonable structure design, dual safety protection, smooth running, low energy consumption, high intelligence etc..

Product Features:

Follows the international design code, like FEM, CMAA, EN ISO, GB.
Equip with NW series European standard winch, the gear box and motor is directly connection; the winch has dual brake design, can add extra disk brake on the drum; Nante can customized the winch base on the different special requirement.?
The girder is equipped with walkway and handrail, which is reasonable design, compact and welded by S355 material, the welding specification follows ISO 15614, AWS D14.1, deflection can from 1/700 ~ 1/1000, MT or PT is requested for Fillet welding and UT is requested for joint welding.
The wheel is made by forged steel with proper heat treatment. User hollow shaft design end carriage for small capacity crane and bogie design for big capacity cranes which is high transmission efficiency, short wheel base and smooth running.
Branding gear motor with IP55, F insulation class, IE3 Energy efficiency, over-heat protection, manual release bar, and electro-magnetic brake feature. The motor is controlled by inverter for smooth running.
The control panel design follow IEC standard, and it is installed inside IP55 enclosure with socket for easy Installation. The Control Panel is a integrated design and follow IEC standard, use stainless resistor for the inverter to reach a better space utilization. The control enclosure is IP5, can upgrade to IP65, plus heater and special air conditioner for the cooling.
We use I beam trolley festoon system for the hoist power supply and signal transmission, pendent control, remote control and control cabin is all available for the crane control.
SA2.5 Surface pre-treated by blasting according to ISO8501-1; C3-C5 painting system according to ISO 12944-5

To contact Hydromech Hoist and Crane about Double Girder EOT Overhead Crane | Winch | Lifting Capacity 10t-300t use Get a quote.

Product Features:

Follows the international design code, like FEM, CMAA, EN ISO, GB.
Equip with NW series European standard winch, the gear box and motor is directly connection; the winch has dual brake design, can add extra disk brake on the drum; Nante can customized the winch base on the different special requirement.?
The girder is equipped with walkway and handrail, which is reasonable design, compact and welded by S355 material, the welding specification follows ISO 15614, AWS D14.1, deflection can from 1/700 ~ 1/1000, MT or PT is requested for Fillet welding and UT is requested for joint welding.
The wheel is made by forged steel with proper heat treatment. User hollow shaft design end carriage for small capacity crane and bogie design for big capacity cranes which is high transmission efficiency, short wheel base and smooth running.
Branding gear motor with IP55, F insulation class, IE3 Energy efficiency, over-heat protection, manual release bar, and electro-magnetic brake feature. The motor is controlled by inverter for smooth running.
The control panel design follow IEC standard, and it is installed inside IP55 enclosure with socket for easy Installation. The Control Panel is a integrated design and follow IEC standard, use stainless resistor for the inverter to reach a better space utilization. The control enclosure is IP5, can upgrade to IP65, plus heater and special air conditioner for the cooling.
We use I beam trolley festoon system for the hoist power supply and signal transmission, pendent control, remote control and control cabin is all available for the crane control.
SA2.5 Surface pre-treated by blasting according to ISO8501-1; C3-C5 painting system according to ISO 12944-5

Read less...

To contact Hydromech Hoist and Crane about Double Girder EOT Overhead Crane | Winch | Lifting Capacity 10t-300t use Get a quote.

AI Overview BETA

NANTE's double-girder EOT overhead crane uses a winch for lifting, with capacity options from 10 t to 300 t. The crane motor uses inverter control, which supports smooth running during lifting operations. For high-duty work, operators can control the crane by pendant, remote control or from a cabin, giving buyers a choice of operating method.

Winch has dual brakes; an extra disk brake on the drum is optional
Lifting speed ranges from 2 m/min to 40 m/min
Classification groups range from M4 to M8
Gear motor has IP55 protection, F insulation class and IE3 energy efficiency
Motor includes overheat protection, a manual release bar and electromagnetic brake

Source: listing by Hydromech Hoist and Crane on IndustrySearch · Updated 5 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Hydromech Hoist and Crane provide you with a quote

Supplier

Supplier: Hydromech Hoist and Crane

Location: Dandenong South, VIC

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Hydromech Hoist and Crane are also proudly displaying these credentials:

Location:

Dandenong South , VIC

Joined:

Nov 2024

Level:

Premium Storefront

Verified: