Underhung Overhead Crane | Lifting Capacity ...

Underhung Overhead Crane | Lifting Capacity 0.25t-10t

Supplier: Hydromech Hoist and Crane

1/3

The underhung overhead crane is design for low headroom, light duty group and small capacity which normally use for low height workshop or aircraft maintenance hanger.

Gear motor with IP55

Receive 1-3 days from order

Underhung overhead crane is a special overhead crane which is adapt to workshop without corbel. Nante’s underhung overhead crane is equipped with low headroom hoist and monorail end carriage with the features of compact design, light self-weight, low noisy, easy for installation and maintenance.

Product Features:

Follows the international design code, like FEM, CMAA, EN ISO.
Can equip with low headroom hoist or chain hoist
The girder is compact, low self-weight, and welded by S355 material, the welding specification follows ISO 15614, AWS D14.1, deflection can from 1/700 ~ 1/1000, MT or PT is requested for Fillet welding and UT is requested for joint welding.
The end carriage can be hollow shaft or open gear type design, the wheel is made by alloy steel with proper heat treatment.
Branding gear motor with IP55, F insulation class, IE3 Energy efficiency, over-heat protection, manual release bar, and electro-magnetic brake feature. The motor is controlled by inverter for smooth running.
The control panel design follow IEC standard, and is installed inside IP55 enclosure with socket for easy Installation.
Double line Galvanized C track festoon system with flat cable, one line for hoist power and signal transmission, one line for the pendent control trolley movement.
SA2.5 Surface pre-treated by blasting according to ISO8501-1; C3-C5 painting system according to ISO 12944-5

To contact Hydromech Hoist and Crane about Underhung Overhead Crane | Lifting Capacity 0.25t-10t use Get a quote.

Product Features:

Follows the international design code, like FEM, CMAA, EN ISO.
Can equip with low headroom hoist or chain hoist
The girder is compact, low self-weight, and welded by S355 material, the welding specification follows ISO 15614, AWS D14.1, deflection can from 1/700 ~ 1/1000, MT or PT is requested for Fillet welding and UT is requested for joint welding.
The end carriage can be hollow shaft or open gear type design, the wheel is made by alloy steel with proper heat treatment.
Branding gear motor with IP55, F insulation class, IE3 Energy efficiency, over-heat protection, manual release bar, and electro-magnetic brake feature. The motor is controlled by inverter for smooth running.
The control panel design follow IEC standard, and is installed inside IP55 enclosure with socket for easy Installation.
Double line Galvanized C track festoon system with flat cable, one line for hoist power and signal transmission, one line for the pendent control trolley movement.
SA2.5 Surface pre-treated by blasting according to ISO8501-1; C3-C5 painting system according to ISO 12944-5

Read less...

To contact Hydromech Hoist and Crane about Underhung Overhead Crane | Lifting Capacity 0.25t-10t use Get a quote.

Let Hydromech Hoist and Crane provide you with a quote

Supplier

Supplier: Hydromech Hoist and Crane

Location: Dandenong South, VIC

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Hydromech Hoist and Crane are also proudly displaying these credentials:

Location:

Dandenong South , VIC

Joined:

Nov 2024

Level:

Premium Storefront

Verified: