Overhead Crane MRC | 5T Capacity

Read more...

To contact Hydromech Hoist and Crane about Overhead Crane MRC | 5T Capacity use Get a quote.

High Quality, Fast Delivery, Professional Design to ISO & Australian Standards

50 Years of Australian Engineering combined with the production power of Nante Crane Components to meet your every need.

END USERS - We'll have the crane delivered to site and connect you with a trusted local service company to install and maintain

SERVICE COMPANIES - We'll open the door for you to be able support your client with a high quality product that lands on your door step

We've done the work for you to make sure everything is made to ISO and Australian Standards so you can get producing.

Crane LDX1T-20T as per the following specifications:

• Crane Load: 1600kg, 3200kg, 5000kg, 6300kg, 10,000kg, 12500kg, 16000kg, 20000kg
• Span: TBC
• Hoisting Height: 6m-24m available
• Crane Class: A5 M5
• Hoist/Trolley Model: NHA
• Hoist Motor: SEW
• Load Limiter: Yes.
• Data Logger: Yes. (Option)
• Hoisting Speeds: 4.2/0.7 m/min DOL
• Trolley Speeds: 20/5 m/min Inverter
• Crane Speeds: 32/8 m/min Inverter
• Main Girder Type: Can vary to your requirements
• Travel/Traverse Limit: Yes, slow down/stop. Die Cast Al. IP66
• Control: Remote c/w spare if required
• Supply Voltage: 415V 3ph 50Hz
• Control Voltage: 48V
• Protection/Class: IP55 / “F”
• Environment: Indoor / Non-Aggressive
• Finish: Class 2.5 Shot Blast, 2 pack Epoxy - Hempel brand.

Moving forward NANTE crane components won’t break the bank account to supply new cranes, hoists & necessary parts when required.

We also can supply fabricated runways & complete crane kits built specifically for your site in a shipping container.

Example: Shipping container arrives onsite - Install new 10t SG crane & commissioned. 3 days 2 technicians

• Assemble instructions provided.

• We can arrange contractor to quote your site to assemble crane, install & commission.

• Unload crane out of container with the use of the OHC or forklift.

• Assemble the crane – Hand tools & tension bar.

• Fit C Track the electrics. Cables fit to Switch Board by plugs.

• Fit remote control – if necessary

• Fit anti-collision targets on existing crane if necessary.

• Fit LT slowdown & stop strikers if necessary.

• Function test prior to installing onto runway.

• Franner crane & dogman to lift crane onto runway if necessary.

• Supply access equipment to install crane if necessary.

• Fit 3 phase + earth collectors supplied with crane kit.

• Function test, load test & commission crane.

Read less...

To contact Hydromech Hoist and Crane about Overhead Crane MRC | 5T Capacity use Get a quote.