Etaprime B | Volute Pump for sale from KSB Australia

Etaprime B | Volute Pump

Supplier: KSB Australia

Etaprime B | Volute Pump

Horizontal self-priming volute casing pump, single-stage, with open multi-vane impeller, close-coupled; pump shaft and motor shaft rigidly connected; ATEX-compliant version available.

22 Recent Views In Stock

Application

Pumping clean, contaminated or aggressive fluids not containing abrasive substances and solids. For use in spray irrigation systems, service water systems, drainage, dewatering systems, fire-fighting systems, drawdown of groundwater levels, domestic water supply, air-conditioning systems, cooling circuits, swimming pools, water supply systems.

Main applications

Breweries
Food and beverages
Industrial waste water
Industry engineering
Mining
Municipal waste water
Process
Suspended solids treatment
Waste water

Overview of technical data

Q (50Hz)	4.0 – 150.0 (m³/h)
H (50Hz)	3.5 – 100.0 (m)
Type of bearing	Ball bearings
Casing partition	Radially split
Drive	IEC standardized motor, electric motor
Drive frequency	50 Hz /60 Hz
Type of drive	Electric motor
Drive voltage	Low voltage
No. of impeller entries	Single entry
Impeller material (EN standard)	1.4408, JL 1040
Type of installation	Close-coupled
Type of coupling	Direct
Type of lubrication	Grease / Oil lubrication
Max. permissible fluid temperature	90.0 (°C)
Guaranteed to be silicon-free	Yes
Nozzle position	End suction
Maximum operating pressure	PN 16
Pull-out design	Yes
Pump set location	Dry installed
Shaft material (EN standard)	1.4571, C45+N
Suction characteristics	Self-priming
Suitable for drinking water	Yes
Type of casing	Volute casing
Type of impeller	Open, Multi-vane impeller
Type of connection	Screw-ended, flange
Casing material (EN standard)	JL 1040, 1.4408
Free passage	10.0 (mm)
Installation position	Horizontal
Shaft seal type	Mechanical seal
Main applications	Waste water / sewage, Industry and process engineering, Water, Building services
Casing material	Cast stainless steel, Cast iron
Maximum discharge-side pressure	10.0 (bar)
Maximum drive rating	30.0 (kW)
Type of installation	Stationary
Maximum speed of rotation	3500.0 (1/min)

Application

Main applications

Breweries
Food and beverages
Industrial waste water
Industry engineering
Mining
Municipal waste water
Process
Suspended solids treatment
Waste water

Overview of technical data

Q (50Hz)	4.0 – 150.0 (m³/h)
H (50Hz)	3.5 – 100.0 (m)
Type of bearing	Ball bearings
Casing partition	Radially split
Drive	IEC standardized motor, electric motor
Drive frequency	50 Hz /60 Hz
Type of drive	Electric motor
Drive voltage	Low voltage
No. of impeller entries	Single entry
Impeller material (EN standard)	1.4408, JL 1040
Type of installation	Close-coupled
Type of coupling	Direct
Type of lubrication	Grease / Oil lubrication
Max. permissible fluid temperature	90.0 (°C)
Guaranteed to be silicon-free	Yes
Nozzle position	End suction
Maximum operating pressure	PN 16
Pull-out design	Yes
Pump set location	Dry installed
Shaft material (EN standard)	1.4571, C45+N
Suction characteristics	Self-priming
Suitable for drinking water	Yes
Type of casing	Volute casing
Type of impeller	Open, Multi-vane impeller
Type of connection	Screw-ended, flange
Casing material (EN standard)	JL 1040, 1.4408
Free passage	10.0 (mm)
Installation position	Horizontal
Shaft seal type	Mechanical seal
Main applications	Waste water / sewage, Industry and process engineering, Water, Building services
Casing material	Cast stainless steel, Cast iron
Maximum discharge-side pressure	10.0 (bar)
Maximum drive rating	30.0 (kW)
Type of installation	Stationary
Maximum speed of rotation	3500.0 (1/min)

Read less...

To contact KSB Australia about Etaprime B | Volute Pump use Get a quote.

AI Overview BETA

The Etaprime B is a horizontal, close-coupled, single-stage self-priming volute pump with an open, multi-vane impeller for stationary installation. Its pump shaft and motor shaft are rigidly connected, forming a direct coupling to an electric motor. Municipal and industrial wastewater applications include pumping clean, contaminated or aggressive fluids that contain no abrasive substances or solids.

ATEX-compliant version available
Flow: 4.0–150.0 m³/h; head: 3.5–100.0 m
Free passage: 10.0 mm
Maximum fluid temperature: 90.0°C
Maximum operating pressure: PN 16

Source: listing by KSB Australia on IndustrySearch · Updated 3 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let KSB Australia provide you with a quote