Fieldpiece Dual Port Manometer | ADMN2

Fieldpiece - Dual Port Manometer | ADMN2

Dual Port Manometer | ADMN2

Static Pressure Differential Head

In Stock

The ADMN2 is a portable dual port manometer accessory head for use with our modular multimeters (DMMs) and instruments. Measures gas pressure, static pressure and pressure differential. The ADMN2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. Disable APO for data logging. The ADMN2 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The ADMN2 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of 0.01inWC or 0.01mBar.

Features of this product

Measures duct pressures to balance air flow
Resolution down to 0.01" WC for static pressure measurement
-60.0"WC to 60.0"WC range

Specifications of this product

Pressure Ports: Two tube connectors for 4mm (3/16 inch) I.D. flexible tubing
Units of Measure: inWC and mbar
Accuracy: ±0.02inWC, ±(0.00inWC to 2.00inWC); ±1.5% FS, ±(2.00inWC to 60.0inWC); ±0.05mbar, ±(0.00mbar to 5.00mbar); ±1.5% FS, ±(5.00mbar to 150.0mbar);
Resolution: 0.1 or 0.01 depending on resolution selected (If 0.01 resolution is selected you must divide displayed value by 10 for actual value).
Measurement Range: inWC: -60.0 to 60.0; mBar: -150.0 to 150.0
Operating environment: 32ºF (0°C) to 122ºF (50°C), under 75%RH
Compatible media: Dry, non-corrosive gases
Battery: Single standard 9-volt battery, NEDA; 1604, JIS 006P, IEC 6F22.
Battery Life: 100 hours with low battery LED indicator on accessory head.
Overrange: “OL” or “-OL” is displayed.
Auto power off: 15 minutes
Dimensions: 131mm(~5 3/16”)(H) x 67mm(~27/16”)(W) x 32mm(~1 1/4”)(D)
Weight: approximately 154g (~1/2 pound) including battery

To contact Fieldpiece Australia about Fieldpiece Dual Port Manometer | ADMN2 use Get a quote.

Features of this product

Measures duct pressures to balance air flow
Resolution down to 0.01" WC for static pressure measurement
-60.0"WC to 60.0"WC range

Specifications of this product

Pressure Ports: Two tube connectors for 4mm (3/16 inch) I.D. flexible tubing
Units of Measure: inWC and mbar
Accuracy: ±0.02inWC, ±(0.00inWC to 2.00inWC); ±1.5% FS, ±(2.00inWC to 60.0inWC); ±0.05mbar, ±(0.00mbar to 5.00mbar); ±1.5% FS, ±(5.00mbar to 150.0mbar);
Resolution: 0.1 or 0.01 depending on resolution selected (If 0.01 resolution is selected you must divide displayed value by 10 for actual value).
Measurement Range: inWC: -60.0 to 60.0; mBar: -150.0 to 150.0
Operating environment: 32ºF (0°C) to 122ºF (50°C), under 75%RH
Compatible media: Dry, non-corrosive gases
Battery: Single standard 9-volt battery, NEDA; 1604, JIS 006P, IEC 6F22.
Battery Life: 100 hours with low battery LED indicator on accessory head.
Overrange: “OL” or “-OL” is displayed.
Auto power off: 15 minutes
Dimensions: 131mm(~5 3/16”)(H) x 67mm(~27/16”)(W) x 32mm(~1 1/4”)(D)
Weight: approximately 154g (~1/2 pound) including battery