KLINGSPOR flap discs are made of zirconia alumina, ceramic, or aluminium oxide coated flaps fastened to glass fibre-reinforced or glass-fibre backing plates. The even arrangement of the flaps guarantees high flexibility, constant high grinding performance and low-vibrations.

Product ranges available:

Range: SMT624
- Application: Steel, Stainless Steel
- Quality class: Supra
- Grain: Zirconia alumina
- Design: Convex 12°
- Backing plate: Glass-fibre
- Characteristics: For universal use in demanding edge and surface grinding work. High removal rate and comfortable grinding behaviour.
- Diameter: 100x16mm, 115x22mm, 125x22mm, 180x22mm Grits: 36 to 120
Range: SMT626
- Application: Steel, Stainless Steel
- Quality class: Supra
- Grain: Zirconia alumina
- Design: Convex 6°
- Backing plate: Glass-fibre
- Characteristics: High material removal rates. Considerably longer service life due to unique flap angle and arrangement.
- Diameter: 100x16mm, 115x22mm, 125x22mm
- Grits: 40 to 120
Range: SMT656
- Application: Steel, Stainless Steel
- Quality class: Special
- Grain: Zirconia alumina
- Design: Convex 6°
- Backing plate: Glass-fibre
- Characteristics: Maximum removal rate and service life.
- Especially suitable for rough work on steel and stainless steel. Optimal removal rate when used on high-power angle grinders under increased grinding pressure.
- Diameter: 115x22mm, 125x22mm Grits: 40 to 80
Range: CMT726
- Application: Steel, Stainless Steel
- Quality class: Supra
- Grain: Zirconia alumina
- Design: Convex 6°
- Backing plate: Plastic, glass-fibre reinforced
- Characteristics: Professional abrasive mop disc with rapid action system for applications with high material consumption or frequent changes of grits. Perfectly suited for grinding of surfaces and edges on steel, stainless steel and high-alloy steels.
- Diameter: 125mm
- Grits: 40 to 120
Range: CMT800 Application: Steel, Stainless Steel
- Quality class: Special
- Design: Convex 6°
- Backing plate: Plastic, glass-fibre reinforced
- Characteristics: High quality non-woven web abrasive mop disc for finishing work. Depending on the degree of hardness also suited for cleaning and light deburring work and the processing of TIG-welded seams on stainless steel
- Diameter: 125mm
- Grades: Coarse, Medium, Very fine.
Range: SMT800
- Application: Steel, Stainless Steel
- Quality class: Special
- Design: Convex 12°
- Backing plate: Glass-fibre
- Characteristics: High-quality non-woven mop disc for stainless steel finish work. Optimal results when used on variable-speed angle grinders.
- Diameter: 125mm Grades: Coarse (brown), Medium (maroon), Very fine (blue).
Range: SMT850
- Application: Stainless Steel
- Quality class: Special
- Design: Convex 12°
- Backing plate: Glass-fibre
- Characteristics: High-quality combi non-woven mop disc. Specially suited for machining of WIG weld seams on stainless steel components. Even finish throughout the entire service life. Stock removal and finishing in one step.
- Diameter: 115mm, 125mm
- Grades: Coarse (brown), Medium (maroon), Very fine (blue).
Range: NCD200
- Application: Metals, Paint/Varnish/Filler, Plastic, Stainless Steel
- Design: Flat
- Characteristics: Special SiC non-woven web for cleaning of surfaces and removal of heat tinting/blueing. No clogging due to open structure.
- Diameter: 100mm, 115mm, 125mm, 180mm

Klingspor | Abrasive Technologies

KLINGSPOR have set worldwide standards in abrasive technology for more than 120 years. KLINGSPOR is a German manufacturer of a full range of abrasive tools for all applications. Over 50,000 articles ... read more

Contact supplier for specifications

For more information about this item use the form below.

QUICK RESPONSE FORM