Australia's #1 industrial directory for equipment & suppliers

Fronius MMA Welder | TP125VRD-10 Mine-Spec

Supplier: SMENCO

Weighing just 4.7 kg, TP125 Mine-Spec is most compact MMA welder in the Fronius range.

CONTACT THIS SUPPLIER TO FIND OUT MORE

The Fronius TP125VRD-10 iss the only VRD machine that currently meets the new mine OH&S specifications making it the safest MMA machine on the market in Australia.

The Fronius TP125VRD-10 has been designed in direct response to the mines OH&S safety demands – and then some.

Take the safety critical aspect of open circuit voltage (OCV) for example. Australian standards demand a maximum of 35V OCV at the electrode when a MMA VRD machine is not welding. The Fronius TP125-10 VRD is 12V – three times lower than the standard.

When the welding circuit resistance is greater than 200 ohms (for example when touching the human body) the OCV is limited to 12V and the VRD must be active within 0.3 seconds after welding stops.

The software that controls the machine is designed to put the machine in fault mode if the VRD is not working, hence the TP125VRD-10 Mine-Spec machine is deemed to be 'Fail to Safe'.

Unlike other VRD alternatives, there is no need to continually hold down buttons when you are welding which adds to operator fatigue.

The braided heavy-duty input power cable gives extra strength and protection. An earthed braided cable is recommended for all applications where OH & S 'Duty of Care' is essential.

Other key features include:

  • Generator compatible (Min 8KVA)
  • IP23 rated for wet areas
  • Thermostatically controlled fan
  • CE and C-tick approved
  • Anti stick electrode function
  • Meets AS6097/ AS1674.2-2007 standard
  • Arc force dynamic functions

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more