Hainbuch Expanding Mandrels for Clamps/Clamping ...
Hainbuch Expanding Mandrels for Clamps/Clamping Applications
HAINBUCH offer a range of collet chucks and workholding solutions for any workshop or application.
Mini collet chucks, TOPlus and Spanntop Nova collet chucks, mandrels including the innovative Mando adapt system, stationary clamping and adaption clamping devices, quick change-over systems and multi spindle clamping systems, are all part of the HAINBUCH range of quality workholding products
HAINBUCH started as a small job shop in 1951 and have grown into 3 German locations, 11 international subsidiaries with more than 750 staff, and over 40 agencies worldwide. Romheld Automation represents their products in Australia and New Zealand.
The HAINBUCH modular system offers a flexible, easy, fast answer to your workholding needs. One fits into the other, whether hexagon or round. One system, two basic variants: lots of possibilities.
The new Mini series chuck has a 38% mass reduction and a smaller chuck body diameter meaning reduced energy consumption and better tool accessibility.
The Hainbuch intelligent TOPlus IQ chuck for workpiece clamping received an MM Award Innovation Prize in September 2016. With its integrated sensor technology, Toplus IQ continuously measures the actual clamping force applied to a workpiece, with results sent to the machine’s CNC for processing.
The range of workholding products from HAINBUCH
MODULAR CHUCK
Parallel clamping with through bore for bars & tubes
COMBI PULL-BACK CHUCK
For chucking and bar work, available with integrated end stops and part present sensing options. Converts to fully functional ‘bar chuck’ when end stop is removed.
COMBI DEADLENGTH CHUCK
With fixed clamp head, through bore and end stop. Ideal for workpieces with a short collar or shoulder.
MANDO ADAPT ROTATING AND STATIONARY COLLET CHUCK SYSTEM
For applications where it is necessary to make frequent changes from internal to external clamping. Quickly and easily converts a collet chuck into an expanding mandrel.
JAW ADAPTOR ROTATING AND STATIONARY COLLET CHUCK SYSTEM
For increased flexibility the jaw adaptor converts a Combi Pull-Back collet chuck into a 3-jaw chuck.
ECCENTRIC CHUCKS
Concentric and eccentric machining in a single clamping setup.
TOROK MANUAL CHUCKS
The manual chuck for lathes utilising the Hainbuch clamp head system.
To contact Romheld Automation about Hainbuch Expanding Mandrels for Clamps/Clamping Applications use Get a quote.
Mini collet chucks, TOPlus and Spanntop Nova collet chucks, mandrels including the innovative Mando adapt system, stationary clamping and adaption clamping devices, quick change-over systems and multi spindle clamping systems, are all part of the HAINBUCH range of quality workholding products
HAINBUCH started as a small job shop in 1951 and have grown into 3 German locations, 11 international subsidiaries with more than 750 staff, and over 40 agencies worldwide. Romheld Automation represents their products in Australia and New Zealand.
The HAINBUCH modular system offers a flexible, easy, fast answer to your workholding needs. One fits into the other, whether hexagon or round. One system, two basic variants: lots of possibilities.
The new Mini series chuck has a 38% mass reduction and a smaller chuck body diameter meaning reduced energy consumption and better tool accessibility.
The Hainbuch intelligent TOPlus IQ chuck for workpiece clamping received an MM Award Innovation Prize in September 2016. With its integrated sensor technology, Toplus IQ continuously measures the actual clamping force applied to a workpiece, with results sent to the machine’s CNC for processing.
The range of workholding products from HAINBUCH
MODULAR CHUCK
Parallel clamping with through bore for bars & tubes
COMBI PULL-BACK CHUCK
For chucking and bar work, available with integrated end stops and part present sensing options. Converts to fully functional ‘bar chuck’ when end stop is removed.
COMBI DEADLENGTH CHUCK
With fixed clamp head, through bore and end stop. Ideal for workpieces with a short collar or shoulder.
MANDO ADAPT ROTATING AND STATIONARY COLLET CHUCK SYSTEM
For applications where it is necessary to make frequent changes from internal to external clamping. Quickly and easily converts a collet chuck into an expanding mandrel.
JAW ADAPTOR ROTATING AND STATIONARY COLLET CHUCK SYSTEM
For increased flexibility the jaw adaptor converts a Combi Pull-Back collet chuck into a 3-jaw chuck.
ECCENTRIC CHUCKS
Concentric and eccentric machining in a single clamping setup.
TOROK MANUAL CHUCKS
The manual chuck for lathes utilising the Hainbuch clamp head system.
To contact Romheld Automation about Hainbuch Expanding Mandrels for Clamps/Clamping Applications use Get a quote.
Robotic Grippers | Soft Grippers
Rotating and Stationary Collet Lathe Chuck System | Hainbuch
Hainbuch Expanding Mandrels for Clamps/Clamping Applications
Lathe Chucks | Precision Collet Type
Unigripper Vacuum Sheet Lifter
Goudsmit Magnetic Grippers
Schunk Tool Holders
Pneumatic Clamps
Clamps/Clamping Systems
Dovetail Clamps\Clamping System
Air nippers | Cutting Tools
Rotary Tables and Index Drives
Rotary Tables and Index Drives | EXPERT
Vacuum Gripper System | Unigripper Co/Light
Industrial Robots & Robotics Tool Changers
Machine Chucks - Precision Diaphragm Chucks
Low Profile Work Clamps | OK Vise
Robotic Deburring Tools | ATI Flexdeburr
Magnetic Lifting Grab Heads/Grippers
Centres & Face-Drivers for CNC Lathes
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales