ELECTRICAL CONTROLS: 24v switching control 3 switches - 1 push to start, 1 push to stop and 1 emergency latch-in stop button
Drive: Twin “V” belt drive reduction on 1.5 kw 415v motor with a standard speed of 3000 ft/min Optional 0.75 kw 240v motor with single “V” belt drive reduction Optional speeds available on request
SAW BLADE: 13mm wide x 2870 x 3TPI
BLADE TENSIONER: Fully automatic with blade tension maintained at all times Entire motor and transmission and lower pulley assembly is slide tension mounted Automatic blade tension lever mounted below left of table Broad blade length adjustment not required
BLADE GUIDES AND CLEANERS: Top and bottom guides are interchangeable Blade guide is tin plated steel with built in tungsten carbide blade back up Top and bottom guides are removable for cleaning Guides and blade cleaners are easily removed with the use of a small ring spanner
WHEELS: Light weight aluminum wheels - corrosion resistant Top wheel easily removed for cleaning, dynamically balanced for vibration free operation Automatic blade tensioning ensures true running of the blade at all times Top wheel safety lock minimises likelihood of wheel becoming dislodged from its supports in case of blade breakage
CAPACITY: Cutting clearance 275mm high x 305mm wide
STATIONARY CUTTING TABLE: One piece 590mm x 810mm heavy duty 2.0mm stainless steel Turned down edges for rigidity, fully supported for heavy duty use Easy cleaning one-piece table, heavy-duty nylon table insert promotes longer blade life
GAUGE PLATE: Large 406 x 152mm gauge plate mounted on full stainless steel assembly Easy adjustment ensures uniform thickness of cut Easily removed for breakdown work and cleaning
CONSTRUCTION: Full stainless steel, smooth grain finish Removable stainless steel top and bottom doors Stainless steel back cover
Upper and lower pulleys (wheels) are completely enclosed but readily accessible
Blade is guarded above and below the cutting zone, wrap around top blade guard
Fail to safe door interlocks to Australian standard AS4024.1 ensure the machine will not operate with the doors in the open position.
Machine ceases operation within approximately 5 seconds of power being turned off Waist high, front of table mounted, start and stop buttons.
Plus latch in, twist to release, emergency stop switch (in emergency operator can lean against the machine to cease operation. Button must be manually released to re-start machine.
24 volt switching control
Adjustable polyurethane feet for maximum stability.
Auto overload motor protection on 415 volt, manual on 240 volt
Hall Food Equipment | Butchery Equipment
Hall Food Equipment is an Australian owned and operated company and has been manufacturing Butchery Equipments in Sydney since 1945. During this time we have successfully expanded our range of Meat ...