Hall Mark 1 Bandsaw

Read more...

To contact Hall Food Equipment about Hall Mark 1 Bandsaw use Get a quote.

Hall Mark 1 Bandsaw Specifications:

• MOTOR:
  1.5 kw standard, 415v, 3ph, 50hz, cabinet enclosed, foot mounted, grease pre-packed ball bearings
  Optional: 2.2 and 3.0 kw
• ELECTRICAL CONTROLS:
  24v switching control
  3 switches - 1 push to start,
  1 push to stop and 
  1 emergency latch-in stop button
• Drive:
  Twin “V” belt drive reduction
  Standard blade speed of 3000 ft/min
  Optional speeds available on request
• SAW BLADE:
  13mm wide x 3600 x 3TPI
• BLADE TENSIONER:
  Fully automatic with blade tension maintained at all times
  Automatic blade tension lever mounted below left of table
  Broad blade length adjustment not required
  Entire motor and transmission and lower pulley assembly is slide tension mounted
• BLADE GUIDES AND CLEANERS:
  Top and bottom guides are interchangeable
  Blade guide is tin plated steel with built in tungsten carbide blade back up
  Top and bottom guides are removable for cleaning
  Guides and blade cleaners are easily removed with the use of a small ring spanner
• WHEELS:
  Light weight aluminum wheels - corrosion resistant
  Top wheel easily removed for cleaning, 
  Dynamically balanced for vibration free operation
  Automatic blade tensioning ensures true running of the blade at all times
  Top wheel safety lock minimises likelihood of wheel becoming dislodged from its supports in case of blade breakage
• CAPACITY:
  Cutting clearance 405mm high x 435mm wide
• STATIONARY CUTTING TABLE:
  One piece 825mm x 865mm heavy duty 2.5mm stainless steel
  Turned down edges for rigidity, fully supported for heavy duty use
  Easy cleaning one-piece table, heavy-duty nylon table insert promotes longer blade life
• MOVABLE CUTTING TABLE:
  Movable cutting table attachment available as option
  Easily removed for cleaning leaving large stationary table for break down
• GAUGE PLATE:
  Large 406 x 152mm gauge plate mounted on full stainless steel assembly
  Easy adjustment ensures uniform thickness of cut
  Easily removed for breakdown work and cleaning
• CONSTRUCTION:
  Full stainless steel, smooth grain finish
  Removable stainless steel top and bottom doors
  Stainless steel back cover

Safety Features:

• Upper and lower pulleys (wheels) are completely enclosed but readily accessible
• Blade is guarded above and below the cutting zone, 
• Wrap around top blade guard
• Fail to safe door interlocks to Australian standard AS4024.1 ensure the machine will not operate with the doors in the open position
• Machine ceases operation within approximately 7 seconds of power being turned off
• Waist high, front of table mounted, start and stop buttons
• Plus latch in, twist to release, emergency stop switch (in emergency operator can lean against the machine to cease operation. Button must be manually released to re-start machine.
• 24 volt switching control
• Adjustable polyurethane feet for maximum stability
• Auto overload motor protection

Optional:

• Emergency latch in, pull to release foot kick switch
• Running indicator light

Sanitation

• Smooth grain finish and radius corners, together with removable doors, promotes ease of cleaning
• Plastic removable bone dust tray
• Sealed motor compartment eliminates scrap entry

Weight:

• Net shipping weight: 240 kg SHIPPING SIZE in cm: 204 h x 100 w x 90 d
• DIMENSIONS: Height: 1945mm Floor area: 900mm x 890mm

Read less...

To contact Hall Food Equipment about Hall Mark 1 Bandsaw use Get a quote.