Hydraulic Hammer | Toku | TNB-08M
Hydraulic Hammer | Toku | TNB-08M
The Toku hydraulic breaker design incorporates only two internal moving parts, offering reliability and long life.
- Nitrogen Cushion Chamber: Designed to absorb piston recoil and recycle the energy to increase output on the next blow
- Short Tie Rods: Utilising protected threads yield long life and high reliability
- Large Piston mass and supporting area: Provides for positive alignment, transferring maximum energy and efficiency to the tool
- Control Valve: Simplicity of the valve's design minimises interruption of oil flow, reducing hydraulic pulsations
- Underwater application: Port available for air inlet
- Piston and Tool: 50:50 weight ration brings the ideal energy transfer and least recoil back to the excavator
- Dual retainer pins: Ensure positive tool alignment and easy tool replacement
Click here for further product information
To contact Australian Hammer Supplies about Hydraulic Hammer | Toku | TNB-08M use Get a quote.
- Nitrogen Cushion Chamber: Designed to absorb piston recoil and recycle the energy to increase output on the next blow
- Short Tie Rods: Utilising protected threads yield long life and high reliability
- Large Piston mass and supporting area: Provides for positive alignment, transferring maximum energy and efficiency to the tool
- Control Valve: Simplicity of the valve's design minimises interruption of oil flow, reducing hydraulic pulsations
- Underwater application: Port available for air inlet
- Piston and Tool: 50:50 weight ration brings the ideal energy transfer and least recoil back to the excavator
- Dual retainer pins: Ensure positive tool alignment and easy tool replacement
Click here for further product information
To contact Australian Hammer Supplies about Hydraulic Hammer | Toku | TNB-08M use Get a quote.
The Toku TNB-08M is a hydraulic rock breaker with two internal moving parts, designed to break rock using hydraulic power. Its nitrogen cushion chamber absorbs piston recoil, then recycles that energy to increase output on the next blow during operation. For underwater breaking work, an available port lets operators connect an air inlet for the application.
- Short tie rods have protected threads
- Large piston mass and support area help keep the tool aligned
- Control valve design reduces oil-flow interruption and hydraulic pulsations
- Piston-to-tool weight ratio is 50:50, reducing recoil to the excavator
- Dual retainer pins align the tool and make replacement easier
Source: listing by Australian Hammer Supplies on IndustrySearch · Updated 31 Oct 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Australian Hammer Supplies on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
B1 Hammer Suitable For 1-2T Excavator
B2S Silenced Hammer Compatible With 1.7-3.5T Excavator
H115 GC Hammer
H120 GC Hammer
Hydraulic Rock Breakers / Hammer
Rock Breaker Hammer Excavator | B1
Rock Breaker Hammer Excavator | B2s
Rock Breaker Hammer Excavator | H130GC
Excavator Hydraulic Hammer 1.7t - 36t
Hydraulic Breaker Attachments | 4-7T RPR40
Hydraulic Hammers - CAT
Hydraulic Hammer | Toku Tnb 1m
Hydraulic Hammer | Toku Tnb 08m
Hydraulic Hammer | Toku | TNB-7E
Hydraulic Breakers Attachment Hire
Hydraulic Hammer | Medium HP 3000 FS
Hydraulic Hammers
Hydraulic Breaker | 2600
Rock Breaker | TNB-08M
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales