Hypertherm Plasma Cutter | Maxpro 200
Hypertherm - Plasma Cutter | Maxpro 200
As far as Plasma Cutters go for CNC applications the Maxpro 200 is the pinnacle of production.
With a piercing capacity of up to 32mm plate and the option of using gases such as oxygen & nitrogen, there really is none better in terms of both performance and cut quality. It is hugely reliable too, as is the case with all of Hypertherm's power source options.
Recommended Cutting Capacity – Mild Steel
| CNC – Piercing | 32mm | Maximum thickness that can be effectively pierced in CNC applications |
| CNC – Edge Cutting | 38mm | Good cut quality at speeds of at least 500mm per minute (Edge cutting only) |
| Severance | 57mm | Thickness which can be reasonably severed at slow speed |
Product Specifications:
| Input voltage/Input current | 415v 3 phase / 52 amps |
| Output current | 50-200 amps |
| Duty Cycle @ 40Fc | 200 amps @ 100% |
| Weight | 335kg |
To contact Surefire CNC about Hypertherm Plasma Cutter | Maxpro 200 use Get a quote.
With a piercing capacity of up to 32mm plate and the option of using gases such as oxygen & nitrogen, there really is none better in terms of both performance and cut quality. It is hugely reliable too, as is the case with all of Hypertherm's power source options.
Recommended Cutting Capacity – Mild Steel
| CNC – Piercing | 32mm | Maximum thickness that can be effectively pierced in CNC applications |
| CNC – Edge Cutting | 38mm | Good cut quality at speeds of at least 500mm per minute (Edge cutting only) |
| Severance | 57mm | Thickness which can be reasonably severed at slow speed |
Product Specifications:
| Input voltage/Input current | 415v 3 phase / 52 amps |
| Output current | 50-200 amps |
| Duty Cycle @ 40Fc | 200 amps @ 100% |
| Weight | 335kg |
To contact Surefire CNC about Hypertherm Plasma Cutter | Maxpro 200 use Get a quote.
The Hypertherm Maxpro 200 is a plasma cutter for cutting metal plate as part of production work. Its CNC piercing capacity reaches up to 32 mm in mild steel, allowing it to pierce plate up to that thickness before cutting. CNC cutting operations suit it best, with oxygen and nitrogen among the available gas options.
- Good-quality edge cuts: 38 mm mild steel at 500 mm/min or faster
- 57 mm severance capacity at slow speed
- Output current: 50–200 amps
- 200 amps at 100% duty cycle at 40Fc
- 415 V three-phase input, drawing 52 amps
Source: listing by Surefire CNC on IndustrySearch · Updated 27 Oct 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Surefire CNC on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Power 6061/T Plasma Cutter
Power 2025/M Plasma Cutter
Plasma Cutter | Hypertherm Powermax 30
Plasma Cutter | Hypertherm Powermax 45
Plasma Cutter. Hypertherm Powermax 65
Plasma Cutter. Hypertherm Powermax 85
Plasma Cutter. Hypertherm Powermax 1650
Automated Plasma Cutter | HyPerformance HPR260XD
Plasma Cutters
Plasma Cutter | Powermax 105
Plasma Cutter | BURNY 10LCD PLUS
Powermax 125 Plasma Cutter | HYM059530
Powermax 125 Plasma Cutter Welding Torch
Cutmaster 20mm | CIGW111304 | Plasma Cutters
Plasma Cutter Powermax30 AIR Plasma System
Plasma Cutter Powermax65 Plasma System
Plasma Cutter Powermax85 Plasma System
Plasma Cutter Powermax105 Plasma System
Plasma Cutter | Power Plasma 2025/M
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales