Parking Facilities Limited Inductive Loop ...
Parking Facilities Limited - Inductive Loop Detectors
Our Single/Dual channel vehicle / inductive loop detectors are a high quality product.
Single channel loop detectors are used to identify the presence of vehicles by means of an inductive loop buried under the road. These “single chip” microprocessor-based units benefit from a detect filter and frequency indicator and are suitable for parking control and motorised door or gate applications all detectors are CE tested and approved.
Key Points
- Single OR Dual Channel
- Standard Size
- Led Diagnostic Lights
- Standard Connection Pins
- Frequency Change
- Easy Dip-Switch Settings
- Different detector strength settings
- Retains settings after power failure
- Power Modes: Theses are available in 24v or 230v
- Powerfail memory (optional) – to retain presence when power is restored.
- Compact size
- Diagnostic capabilities (when used with a DU100)
- Selectable permanent presence (to eliminate premature barrier / gate closure)
- Loop isolation protection
- Loop frequency indication (to eliminate interference with adjacent loops)
- Automatic sensitivity boost (ASB) – for reliable detection of high-bed vehicles (e.g. lorries)
- Detect filter – for screening out unwanted inputs.
To contact Portcullis Australia about Parking Facilities Limited Inductive Loop Detectors use Get a quote.
Single channel loop detectors are used to identify the presence of vehicles by means of an inductive loop buried under the road. These “single chip” microprocessor-based units benefit from a detect filter and frequency indicator and are suitable for parking control and motorised door or gate applications all detectors are CE tested and approved.
Key Points
- Single OR Dual Channel
- Standard Size
- Led Diagnostic Lights
- Standard Connection Pins
- Frequency Change
- Easy Dip-Switch Settings
- Different detector strength settings
- Retains settings after power failure
- Power Modes: Theses are available in 24v or 230v
- Powerfail memory (optional) – to retain presence when power is restored.
- Compact size
- Diagnostic capabilities (when used with a DU100)
- Selectable permanent presence (to eliminate premature barrier / gate closure)
- Loop isolation protection
- Loop frequency indication (to eliminate interference with adjacent loops)
- Automatic sensitivity boost (ASB) – for reliable detection of high-bed vehicles (e.g. lorries)
- Detect filter – for screening out unwanted inputs.
To contact Portcullis Australia about Parking Facilities Limited Inductive Loop Detectors use Get a quote.
Parking Facilities Limited Inductive Loop Detectors identify the presence of vehicles using an inductive loop buried beneath a road surface, available in single- or dual-channel configurations. Automatic sensitivity boost supports reliable detection of high-bed vehicles such as lorries. For parking control and motorised doors or gates, selectable permanent presence helps prevent premature barrier or gate closure.
- Detect filter screens out unwanted inputs
- Loop frequency indication helps prevent interference with adjacent loops
- Optional power-fail memory retains presence when power is restored
- 24 V or 230 V power options
- All detectors are CE tested and approved
Source: listing by Portcullis Australia on IndustrySearch · Updated 31 Oct 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Portcullis Australia on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales