Parking Facilities Limited Speed Ramp | ...
Parking Facilities Limited - Speed Ramp | PF5750
The PF5750 Speed Ramp is manufactured from heavy duty recycled PVC segments. The design offers early visual warning and provides a highly effective method of restricting speed.
The speed ramp is available in two alternate heights, consequently applying differing speed restrictions. The 50mm high version reduces speeding vehicles to speeds of 15-20 mph while the 75 mm high version reduces vehicles to speeds of 5-10 mph.
The PF5750 Speed Ramp can be laid in multiple lengths by simply interlocking each of the 500mm wide sections securely with four fixing bolts.
The 75mm high option includes a centre run cable tunnel for temporary traffic lights, fair grounds, water supplies etc.
It is recommended that signage is used in conjunction with speed ramps to warn on-coming traffic.
To contact Portcullis Australia about Parking Facilities Limited Speed Ramp | PF5750 use Get a quote.
The speed ramp is available in two alternate heights, consequently applying differing speed restrictions. The 50mm high version reduces speeding vehicles to speeds of 15-20 mph while the 75 mm high version reduces vehicles to speeds of 5-10 mph.
The PF5750 Speed Ramp can be laid in multiple lengths by simply interlocking each of the 500mm wide sections securely with four fixing bolts.
The 75mm high option includes a centre run cable tunnel for temporary traffic lights, fair grounds, water supplies etc.
It is recommended that signage is used in conjunction with speed ramps to warn on-coming traffic.
To contact Portcullis Australia about Parking Facilities Limited Speed Ramp | PF5750 use Get a quote.
The Parking Facilities Limited PF5750 is a speed ramp made from heavy-duty recycled PVC segments that restricts vehicle speeds. Its sections interlock securely with fixing bolts, allowing the ramp to be laid in multiple lengths. For temporary traffic arrangements, the higher option has a centre cable tunnel for temporary traffic lights, fairground uses and water supplies.
- Two height options apply different speed restrictions
- Each section is 500 mm wide
- 50 mm height: 15–20 mph; 75 mm height: 5–10 mph
- The ramp gives approaching drivers an early visual warning
- Signage is recommended to warn approaching traffic
Source: listing by Portcullis Australia on IndustrySearch · Updated 4 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Portcullis Australia on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Speed Humps & Bumps
Speed Humps & End Caps
Speed Humps
Slo Motion Compliance Speed Hump
Speed Hump - Natural Rubber 350mm
Rubber Speed Humps
Bus Speed Cushion Hump
Heavy Duty Metal Speed Hump | Slow Go
One-Way Spikes System | Above-Ground | Slow-Go Speed Hump
One-Way Spikes | Manual Lock Down Above-Ground | Slow-Go Speed Hump
Speed Hump | Rubber 900mm
Speed Humps I Speed Cushion 2M
Speed Humps I Speed Cushion 1.8M
Speed Humps I Speed Cushion 1.6M
Rubber & Metal Speed Humps | Speed Cushions & One Way Spikes
Standard Metal Speed Hump | Slow Go
Speed Humps | AB-SH-500R
Heavy Duty Steel Speed Hump
Speed Humps
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales