iTEMP TMT181 - Temperature head transmitter

Transformation of sensor signals into stable and standardized output for all signals

30 Recent Views In Stock

Unsurpassed reliability, accuracy and long-term stability in critical processes over all industries. The configurable transmitter not only transfers converted signals from resistance thermometers (RTD) and thermocouples (TC), it also transfers resistance and voltage signals. The standardized output signal used for process measurement is a 4 to 20 mA signal. Swift and easy operation, visualization and maintenance by PC using operating software.

Benefits

High accuracy in total ambient temperature range
Ex certification: ATEX Ex ia and dust ex zone 22 in compliance with EN 50281-1; FM IS; CSA IS
Fault signal on sensor break or short circuit, NAMUR NE 43 compliantEMC to NAMUR NE 21, CE
Configuration during measurement using configuration kit
Galvanic isolation
Output simulation
Marine approval

Features and Specs

Measuring Principle	Head transmitter
Input	1 x RTD, TC, Ohm, mV
Output	1 x analog 4...20 mA
Auxiliary power supply	8...35 V DC (standard-version) 8...30 V DC (Ex-version)
Communication	PCP (pc-programmable)
Installation	Terminal head form B
Accuracy	(Pt100, -50...200 °C) <= 0,2 K (Pt100, -58...392 °F) <= 0,4 °F
Galvanic isolation	yes

Field of application

PC programmable (PCP) temperature head transmitter for converting various input signals into a scalable 4 to 20 mA analog output signal
Input: Resistance thermometer (RTD), thermocouple (TC), resistance transmitter (?), voltage transmitter (mV)
Configuration using a PC with configuration kit (PC-software ReadWin^® 2000)

To contact Endress+Hauser Australia about iTEMP TMT181 - Temperature head transmitter use Get a quote.

Benefits

High accuracy in total ambient temperature range
Ex certification: ATEX Ex ia and dust ex zone 22 in compliance with EN 50281-1; FM IS; CSA IS
Fault signal on sensor break or short circuit, NAMUR NE 43 compliantEMC to NAMUR NE 21, CE
Configuration during measurement using configuration kit
Galvanic isolation
Output simulation
Marine approval

Features and Specs

Measuring Principle	Head transmitter
Input	1 x RTD, TC, Ohm, mV
Output	1 x analog 4...20 mA
Auxiliary power supply	8...35 V DC (standard-version) 8...30 V DC (Ex-version)
Communication	PCP (pc-programmable)
Installation	Terminal head form B
Accuracy	(Pt100, -50...200 °C) <= 0,2 K (Pt100, -58...392 °F) <= 0,4 °F
Galvanic isolation	yes

Field of application

PC programmable (PCP) temperature head transmitter for converting various input signals into a scalable 4 to 20 mA analog output signal
Input: Resistance thermometer (RTD), thermocouple (TC), resistance transmitter (?), voltage transmitter (mV)
Configuration using a PC with configuration kit (PC-software ReadWin^® 2000)

Read less...

To contact Endress+Hauser Australia about iTEMP TMT181 - Temperature head transmitter use Get a quote.