KlineFire Booster Heads
KlineFire - Booster Heads
KlineFire Booster Heads
Booster heads are connection devices that enable fire brigades to pressurise fire mains by pumping water into the fire service. This helps maintain effective water pressure in the face of multiple hydrant usage. They are generally installed as part of a booster & hydrant assembly, although they may be installed as a stand-alone connection.
Booster heads are constructed from either gunmetal or cast iron, with cast iron heads being epoxy lined. They are manufactured with internal spring check valves. Specific fire brigade connections are available to suit the relevant regulatory authorities.
Booster bodies are painted R13 Signal Red. They are offered in a variety of configurations such as bottom or rear entry with screwed, flanged or roll groove connections available.
KlineFire supplied booster heads are manufactured to AS 2419.3, and Class 14 bodies are test pressure rated to 2800Kpa. In accordance with this Standard, KlineFire boosters are supplied with fitted bleed valves, manufacturers name and class identification. Dual and quad boosters are supplied with draincocks and pressure gauges.
KlineFire are proud to be the exclusive Victorian / Tasmanian distributor of “Dobbie Dico” booster heads. Dobbie Dico, an Australian company, have been manufacturing quality brassware for in excess of 60 years. Their booster heads have been the market leaders for over 30 years.
Maintenance and service to booster heads should be conducted regularly in accordance with the provisions set out in AS1851 & AS2419.1.
To contact KlineFire about KlineFire Booster Heads use Get a quote.
Booster heads are connection devices that enable fire brigades to pressurise fire mains by pumping water into the fire service. This helps maintain effective water pressure in the face of multiple hydrant usage. They are generally installed as part of a booster & hydrant assembly, although they may be installed as a stand-alone connection.
Booster heads are constructed from either gunmetal or cast iron, with cast iron heads being epoxy lined. They are manufactured with internal spring check valves. Specific fire brigade connections are available to suit the relevant regulatory authorities.
Booster bodies are painted R13 Signal Red. They are offered in a variety of configurations such as bottom or rear entry with screwed, flanged or roll groove connections available.
KlineFire supplied booster heads are manufactured to AS 2419.3, and Class 14 bodies are test pressure rated to 2800Kpa. In accordance with this Standard, KlineFire boosters are supplied with fitted bleed valves, manufacturers name and class identification. Dual and quad boosters are supplied with draincocks and pressure gauges.
KlineFire are proud to be the exclusive Victorian / Tasmanian distributor of “Dobbie Dico” booster heads. Dobbie Dico, an Australian company, have been manufacturing quality brassware for in excess of 60 years. Their booster heads have been the market leaders for over 30 years.
Maintenance and service to booster heads should be conducted regularly in accordance with the provisions set out in AS1851 & AS2419.1.
To contact KlineFire about KlineFire Booster Heads use Get a quote.
KlineFire Booster Heads connect fire brigade equipment to fire mains, allowing water to be pumped into the fire service. When multiple hydrants are in use, pumping through the heads helps maintain effective water pressure across the fire service. They suit fire protection systems using booster and hydrant assemblies, or sites where a stand-alone connection is needed.
- Manufactured to AS 2419.3
- Class 14 bodies have a 2,800 kPa test pressure rating
- Internal spring check valves
- Gunmetal or cast iron; cast iron heads have an epoxy lining
- Bottom or rear entry, with screwed, flanged or roll groove connections
Source: listing by KlineFire on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by KlineFire on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales