KlineFire Fire Fighting Hydrant Valves
KlineFire - Fire Fighting Hydrant Valves
Hydrant valves are commonly referred to as landing valves or millcocks.
Hydrant valves provide a standardised connection and are installed on fire service pipelines from a reliable water source to control the flow of water, the supply of which is to be utilised for fire fighting purposes.
They are installed as either “Attack Hydrants” which are utilised to directly fight fires or as “Feed Hydrants” which supply water that is pumped back into a fire service, via a booster head, thus restoring pressure that has been depleted through the operation of multiple “Attack Hydrants”.
Security lockout devices are available for Hydrant Valves that can minimise the damage caused by vandals and restrict water loss through unauthorised access. These are required to be locked by special 003 “fire brigade” keyed padlocks.
Each Australian State has its own specific connection requirements. If you have a question regarding a particular connection requirement please e-mail or call KlineFire on (03) 8738 6666.
Hydrant valve manufacture is governed by AS2419.2
Maintenance of Hydrants is prescribed by AS1851
To contact KlineFire about KlineFire Fire Fighting Hydrant Valves use Get a quote.
Hydrant valves provide a standardised connection and are installed on fire service pipelines from a reliable water source to control the flow of water, the supply of which is to be utilised for fire fighting purposes.
They are installed as either “Attack Hydrants” which are utilised to directly fight fires or as “Feed Hydrants” which supply water that is pumped back into a fire service, via a booster head, thus restoring pressure that has been depleted through the operation of multiple “Attack Hydrants”.
Security lockout devices are available for Hydrant Valves that can minimise the damage caused by vandals and restrict water loss through unauthorised access. These are required to be locked by special 003 “fire brigade” keyed padlocks.
Each Australian State has its own specific connection requirements. If you have a question regarding a particular connection requirement please e-mail or call KlineFire on (03) 8738 6666.
Hydrant valve manufacture is governed by AS2419.2
Maintenance of Hydrants is prescribed by AS1851
To contact KlineFire about KlineFire Fire Fighting Hydrant Valves use Get a quote.
KlineFire hydrant valves, also called landing valves or millcocks, provide a standardised connection and control flow from a reliable water source. Feed hydrants send water through a booster head back into a fire service, restoring pressure depleted by multiple attack hydrants. Fire brigades can add security lockout devices to limit vandal damage and restrict unauthorised access.
- Attack hydrants are used to fight fires directly
- Connection requirements vary by Australian state
- Hydrant manufacture is governed by AS2419.2
- AS1851 prescribes hydrant maintenance
- Lockout devices require special 003 “fire brigade” keyed padlocks
Source: listing by KlineFire on IndustrySearch · Updated 1 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by KlineFire on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales