KTW - Outdoor Misting Fans

Read more...

To contact OZmist about KTW Outdoor Misting Fans use Get a quote.

The stylish gloss black powder coat finish suits all décors, and the ultra quiet fan will ensure you keep cool without the noise of our larger variants. The KTW fans feature a 4 bladed fan , making them very quiet while still moving a substantial amount of air.

KTW 2460 Features

• The KTW2460 has a 600mm diameter, 4 bladed fan fabricated from aluminium.
• Superior corrosion resistance. Metal components are zinc plated during construction then powder coated.
• KTW2460 fans have a water ingress rating of IPX4 making them perfect for outdoor use, the only one of it’s kind in Australia and exclusive to Ozmist!
• The KTW2460's  four blade design helps to reduce noise and ‘soften’ the air flow.
• Each fan is fitted with a six nozzle stainless steel misting ring.
• Fans feature 3 speed operation, tilt adjustable and oscillate. 
• Oscillation control allows fan to be stopped in any position.
• Multiple mist fans can be connected to a single high pressure pump module.
• The air stream from our KTW2460 fan will throw cool refreshing air over 9 meters!
• Ideal for large alfresco areas, outdoor areas and areas with corrosive environments.

THE KTW RANGE

The KTW range of fans come in both wall mount and pedestal style, providing a solution for all situations. They can also be supplied without the stainless steel misting ring.

Both the Wall and Pedestal Fans are easily to install. Fan heads on all models are fully assembled in one box. 

All KTW fans are covered by a 12 month warranty.

Easy Installation

• Each fan is assembled and supplied in a carton along with the wall mount bracket
• To Wall Mount the fan you will need a solid surface to fix to and suitable screws/ bolts.
• Measure the height that the mounting bracket is to be fitted. Fix the plate by using suitable screws or bolts.
• Fit the fan to the mounting bracket. Tighten the locking screws to secure the fan.
• Set the fan speed on the controller and slide onto the mount at the back of the motor.
• Pedestal set up
• Remove the round base and poles from the packaging.
• Fit the first length of pole to the base with the included bolts.
• Add lengths of pole to achieve the desired height then fit the fan.
• Tighten the locking screws and fit the controller onto the slide at the back of the motor.

Read less...

To contact OZmist about KTW Outdoor Misting Fans use Get a quote.