Lincoln Engine Driven Welder | Vantage ...

Lincoln - Engine Driven Welder | Vantage 580 AU

Supplier: Allweld Services

Engine Driven Welder | Vantage 580 AU

Compact Design – Get a 580 amp welder in a compact case!

In Stock

The same size as the Vantage® 400! A turbo-charged diesel engine with Lincoln Electric Chopper Technology® makes this a reality! Also, less weight than traditional 580 amp welders makes the Vantage® 580 compact design a great choice for installation on truck beds where available space and weight capacity are limited.

Mine Spec’d complete with Roll Frame/Spill tray, Battery Isolator, Engine Stop, 3 way Weld/Gen/Weld&Gen switch.

Compact Case with Stainless Steel Closure

One of the most compact 580 amp machines available. Suitable for many pickup and service trucks (subject to vehicle capacity limits).
Standard stainless steel roof, side panels and engine-access door deliver added protection and durability.

Multi-Process Welding – Separate Arc Gouge Mode

Select one of five process modes, including CC-stick, downhill pipe (for stick), DC Touch Start TIG®, CV-wire or new arc gouging mode which maximizes output with up to 9.5 mm carbon rods.

VRD Voltage Reduction Device

Reduced OCV in CC and CV modes for added safety.

Innovative Service Access

Lockable, removable sliding engine access door provides ample space for engine and oil filter work without requiring a large clearance space on your truck.
Battery drawer on front of machine and top-mounted radiator cover provide convenient access to these systems.
Patented tilt down control panel for easy servicing of internal components.
Patented radiator cap cover is latched for easy access and is lockable.

Features

Mine spec’d comes fitted with Roll Frame/Spill Tray, Battery Isolator, Engine Stop and 3 way Weld/Gen/Weld&Gen switch.
Compact Case with Stainless Steel Enclosure
Multi-Process Welding, Separate Arc Gouge Mode
Plenty of AC Generator Power
Industrial Diesel Engine – 4 cylinder 1800 RPM Turbo-Charged Perkins®

Specifications

Plenty of AC Generator Power
- 22 kW peak (20 kW continuous) 3-phase 415/240V AC generator power. Will power industrial equipment such as a plasma cutter, pump or inverter welder.
- 1 x 415V 32A and 2 x 240V 15A receptacles for generator power for common construction tools.
Engine: 4 Cylinder 1800 RPM Turbo-Charged Perkins®
- 4 cylinder 1800 RPM Perkins® turbo-charged diesel engine runs smooth and quiet. Standard engine gauges allow you to monitor performance at a glance.
- More HP for output at high alititude than a naturally-aspirated engine.
Processes
- Stick, TIG, MIG, Flux-Cored, Gouging

To contact Allweld Services about Lincoln Engine Driven Welder | Vantage 580 AU use Get a quote.

Mine Spec’d complete with Roll Frame/Spill tray, Battery Isolator, Engine Stop, 3 way Weld/Gen/Weld&Gen switch.

Compact Case with Stainless Steel Closure

One of the most compact 580 amp machines available. Suitable for many pickup and service trucks (subject to vehicle capacity limits).
Standard stainless steel roof, side panels and engine-access door deliver added protection and durability.

Multi-Process Welding – Separate Arc Gouge Mode

Select one of five process modes, including CC-stick, downhill pipe (for stick), DC Touch Start TIG®, CV-wire or new arc gouging mode which maximizes output with up to 9.5 mm carbon rods.

VRD Voltage Reduction Device

Reduced OCV in CC and CV modes for added safety.

Innovative Service Access

Lockable, removable sliding engine access door provides ample space for engine and oil filter work without requiring a large clearance space on your truck.
Battery drawer on front of machine and top-mounted radiator cover provide convenient access to these systems.
Patented tilt down control panel for easy servicing of internal components.
Patented radiator cap cover is latched for easy access and is lockable.

Features

Mine spec’d comes fitted with Roll Frame/Spill Tray, Battery Isolator, Engine Stop and 3 way Weld/Gen/Weld&Gen switch.
Compact Case with Stainless Steel Enclosure
Multi-Process Welding, Separate Arc Gouge Mode
Plenty of AC Generator Power
Industrial Diesel Engine – 4 cylinder 1800 RPM Turbo-Charged Perkins®

Specifications

Plenty of AC Generator Power
- 22 kW peak (20 kW continuous) 3-phase 415/240V AC generator power. Will power industrial equipment such as a plasma cutter, pump or inverter welder.
- 1 x 415V 32A and 2 x 240V 15A receptacles for generator power for common construction tools.
Engine: 4 Cylinder 1800 RPM Turbo-Charged Perkins®
- 4 cylinder 1800 RPM Perkins® turbo-charged diesel engine runs smooth and quiet. Standard engine gauges allow you to monitor performance at a glance.
- More HP for output at high alititude than a naturally-aspirated engine.
Processes
- Stick, TIG, MIG, Flux-Cored, Gouging

Read less...

To contact Allweld Services about Lincoln Engine Driven Welder | Vantage 580 AU use Get a quote.

AI Overview BETA

The Lincoln Vantage 580 AU is an engine-driven diesel welder for stick, TIG, MIG, flux-cored welding and gouging, and generates AC power for industrial equipment and construction tools. Its separate arc-gouging mode maximises output with carbon rods up to 9.5 mm. Pickup and service trucks with limited available space suit its compact case, subject to vehicle capacity limits.

Three-phase generator: 22 kW peak, 20 kW continuous
Generator has one 415 V outlet and two 240 V outlets
Four-cylinder turbocharged Perkins diesel runs at 1,800 RPM
VRD reduces open-circuit voltage in CC and CV modes for added safety
Mine-spec package includes roll frame/spill tray, battery isolator, engine stop and three-way switch

Source: listing by Allweld Services on IndustrySearch · Updated 3 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Allweld Services provide you with a quote