Makken Sheet Processing Equipment | ...
Makken - Sheet Processing Equipment | Galvanized Coating
Designed for efficient and precise coating of metal sheets with a protective layer of zinc. Ideal for industries requiring corrosion-resistant materials, it ensures high-quality, durable finishes.
Main Parameters
Raw material: Steel coils indurated by cold rolling.
Weight raw material: Max. 20 T/coil.
Weight final product: Max. 15 T/coil.
Raw material outer diameter: Ø900 – 1750 mm.
Raw material inner diameter: Ø 508mm/610mm.
Inner diameter final product: Ø 508 mm.
Steel strip thickness: 0.25–1.0 mm.
Steel strip width: 610 – 1250 mm.
Energetic resources: Electric power, gas, steam, water.
Estimated production capacity 200,000 T/year.
Estimated production time: 220 days x 24 hours.
General Introduction
- The maximum production speed is 150 m/min, for the steel strip having the dimensions of 0,4x1100mm, based on the project and the approval for the maximum production speed for the steel strip at this dimensions. Different dimensions of the steel strip will be used a different production speed.
- The minimum production speed is 50m/min.
- The raw material uncoiler and the final product recoiler have a speed limited to 30 –150 m/min.
- The maximum perforation speed is 30 m/min.
- The average galvanizing thickness (both sides) is 180g/m²; zinc thickness regulation limits (both sides) 100 – 300 g/m².
- The condition Zinc coating: normal spangle, spangle-free.
- The quality of the galvanizing coating in according with the national standard GB2518 – 88; while the galvanizing coating does not come off under inspection.
The production line must be equipped with multiple coil adjusting capabilities, if there is no funnel on both sides for leveling, the one-sided deviation must be < ± 1 mm
The production line has function of rewinding final coil in order or in chiasmus.
To contact Makken about Makken Sheet Processing Equipment | Galvanized Coating use Get a quote.
Main Parameters
Raw material: Steel coils indurated by cold rolling.
Weight raw material: Max. 20 T/coil.
Weight final product: Max. 15 T/coil.
Raw material outer diameter: Ø900 – 1750 mm.
Raw material inner diameter: Ø 508mm/610mm.
Inner diameter final product: Ø 508 mm.
Steel strip thickness: 0.25–1.0 mm.
Steel strip width: 610 – 1250 mm.
Energetic resources: Electric power, gas, steam, water.
Estimated production capacity 200,000 T/year.
Estimated production time: 220 days x 24 hours.
General Introduction
- The maximum production speed is 150 m/min, for the steel strip having the dimensions of 0,4x1100mm, based on the project and the approval for the maximum production speed for the steel strip at this dimensions. Different dimensions of the steel strip will be used a different production speed.
- The minimum production speed is 50m/min.
- The raw material uncoiler and the final product recoiler have a speed limited to 30 –150 m/min.
- The maximum perforation speed is 30 m/min.
- The average galvanizing thickness (both sides) is 180g/m²; zinc thickness regulation limits (both sides) 100 – 300 g/m².
- The condition Zinc coating: normal spangle, spangle-free.
- The quality of the galvanizing coating in according with the national standard GB2518 – 88; while the galvanizing coating does not come off under inspection.
The production line must be equipped with multiple coil adjusting capabilities, if there is no funnel on both sides for leveling, the one-sided deviation must be < ± 1 mm
The production line has function of rewinding final coil in order or in chiasmus.
To contact Makken about Makken Sheet Processing Equipment | Galvanized Coating use Get a quote.
Roll Forming Machine | Corrguated Roll Former
Trimdek,Spandek Roll Former
-280x280-state_7.jpg)
Auto CZ Purlin Production Line
CZUM Purlins Auto Production Line MCZUM450
Roll Forming Machine | Cap Roll Former
Light Gauge Steel Frame (LGS) Roll Former
Gutter Roll Former Machine
Roll Forming Machine | Batten Roll Former
Roll Forming Machine | Stud Roll Former
Roll Forming Machine | Track Roll Former
Roll Forming Machine | Rack Post Roll Former
Roll Forming Machine | Rack Box Beam Roll Former
Roll Forming Machine | Single Shutter Roll Former
Roll Forming Machine | Cable Tray Roll Former
Roll Forming Machine | Guard Rail Roll Former
Roll Forming Machine | Commerical Tophat Roll Former
U Shape Auto Duct Line U5
Roll Forming Machine | Silo Roll Former
Mutiple Size Top Hat Forming Line MTH50
Wire Mesh Welding Machine MGWC2500B-04
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales