Martel Precision Loop Calibrator | LC-100

Martel Precision Loop Calibrator | LC-100

With an accuracy of 0.015% of reading, with 0.001 mA resolution, the LC-100 has the highest accuracy in its class. Unique features, such as a “% Error” function, which eliminates manual error calculation and allows the display of the actual versus ideal error at any calibration point, put the LC-100 way beyond similar instruments. The Martel LC-100 can simulate, power, and measure two-wire transmitters. With automatic Step and Ramp functions, the LC-100 enables remote calibration of 4-20mA devices.

Key Features:

• Very high accuracy – ±0.015% of reading
• Very high resolution – 0.001mA/0.001V
• % Error function – eliminates manual error calculation
• Extended adjustment range – digital knob and user-selectable decade output allow both large and incremental (0.001 mA step) output changes
• Reads 0 to 28.000 VDC
• Built in 250 Ohm resistor facilitates calibration of HART devices
• Remote calibrations through Automatic Step and Ramp functions
• Loop power measurements capability
• Simulates, powers, and measures two-wire transmitters
• Five preset outputs (4, 8, 12, 16, 20 mA)
• Fuseless input protection up to 250 VAC
• Supplied in full rubber boot; optional carrying case available

 

To contact HK Calibration Technologies about Martel Precision Loop Calibrator | LC-100 use Get A Quote.

With an accuracy of 0.015% of reading, with 0.001 mA resolution, the LC-100 has the highest accuracy in its class. Unique features, such as a “% Error” function, which eliminates manual error calculation and allows the display of the actual versus ideal error at any calibration point, put the LC-100 way beyond similar instruments. The Martel LC-100 can simulate, power, and measure two-wire transmitters. With automatic Step and Ramp functions, the LC-100 enables remote calibration of 4-20mA devices.

Key Features:

• Very high accuracy – ±0.015% of reading
• Very high resolution – 0.001mA/0.001V
• % Error function – eliminates manual error calculation
• Extended adjustment range – digital knob and user-selectable decade output allow both large and incremental (0.001 mA step) output changes
• Reads 0 to 28.000 VDC
• Built in 250 Ohm resistor facilitates calibration of HART devices
• Remote calibrations through Automatic Step and Ramp functions
• Loop power measurements capability
• Simulates, powers, and measures two-wire transmitters
• Five preset outputs (4, 8, 12, 16, 20 mA)
• Fuseless input protection up to 250 VAC
• Supplied in full rubber boot; optional carrying case available

 

Read less...

To contact HK Calibration Technologies about Martel Precision Loop Calibrator | LC-100 use Get A Quote.