McIntyre Hydraulic Alligator Shear | 320
McIntyre - Hydraulic Alligator Shear | 320
The 320 alligator shear is a must for any yard. Introducing the McIntyre Hydraulic Alligator Shear 320: Experience powerful, efficient cutting for scrap metal with precision and ease.
Features of this product
- The 320 hydraulic alligator shear is equipped with a 320mm, 12.5? inch, blade and is powerful enough to deal with a wide range of cutting and cleaning operations including; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves, all the usual non ferrous metals separations and other materials such as plastic and rubber.
- The 320 can also be used to cut ferrous metals and has a cutting capacity of 50mm, 2 inches of mild steel round bar.
- The jaw is opened and closed by a moveable foot pedal.
- The cutting blades return to the open position as soon as pressure is released, thus increasing operator safety.
- Constant pressure ensures a continuous cutting action.
To contact Pacific Materials Handling about McIntyre Hydraulic Alligator Shear | 320 use Get a quote.
Features of this product
- The 320 hydraulic alligator shear is equipped with a 320mm, 12.5? inch, blade and is powerful enough to deal with a wide range of cutting and cleaning operations including; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves, all the usual non ferrous metals separations and other materials such as plastic and rubber.
- The 320 can also be used to cut ferrous metals and has a cutting capacity of 50mm, 2 inches of mild steel round bar.
- The jaw is opened and closed by a moveable foot pedal.
- The cutting blades return to the open position as soon as pressure is released, thus increasing operator safety.
- Constant pressure ensures a continuous cutting action.
To contact Pacific Materials Handling about McIntyre Hydraulic Alligator Shear | 320 use Get a quote.
The McIntyre 320 is a hydraulic alligator shear that cuts scrap metal and other materials. Constant pressure maintains a continuous cutting action throughout the operation. Scrap yards can use it for cutting and cleaning automotive scrap, whole gearboxes, cylinder heads and blocks, oversized gate valves and for separating non-ferrous metals or processing plastic and rubber.
- Blades return to the open position when pressure is released, increasing operator safety
- 320 mm blade
- 50 mm cutting capacity for mild steel round bar
- Cuts ferrous metals
- A movable foot pedal opens and closes the jaw
Source: listing by Pacific Materials Handling on IndustrySearch · Updated 1 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Pacific Materials Handling on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Material Handler | 835 Mobile
Balers Ariete
Industrial Metal Baler | RR Series
Hydraulic Alligator Shear | 320
Engine Cracker
Peel Grapple | Orange
Mobile Shear | GXT
LS2 Slow Speed Shredder
-280x280-state_7.jpg)
TT5 Trommel Screen
Material Handling Machine | 822G / 824G
718 Tree Care and Material Handling machine
-280x280-state_7.jpg)
Spider Lifts
Excavator Attachment Magnets | HYSK – LMCH HA-6
Electronic Generator Magnet Plate System | Gema 30
Tilter Container | ACT9020
Waste Grapple | 110WG
Vertical Shear | SQUALO 4000
Horizontal Shear | SQUALO 1000
Radiation Detection | RC2 PLUS
Wire & Cable Stripping Machine | Euro-Strip 1000
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales