Multitool Industrial Bench Grinder | ...

Multitool - Industrial Bench Grinder | PO484-250

Supplier: Collins Tools and Welding Supplies

Industrial Bench Grinder | PO484-250

Combine the robust TM400-250 ITM 250mm Bench Grinder with one of Australia's leading belt grinding attachments PO484.

In Stock

TM400-250

Powerful 900W Induction Motor.
25mm width grinding wheels
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Run motor for maximum performance.
Heavy Duty tool rests for maximum user control.
Large eyes shield for increased user safety.

PO484

The Multitool is a renowned Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding grinding sharpening shaping polishing and refinishing.

EFFICIENCY - Superior performance and a user friendly belt change of under 5 seconds.
VERSATILITY - Grinding sanding or polishing in 4 positions on rubber contact wheel platen disc or free strapping. The unit can also be swivelled vertically or any position in between.
ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there allowing for finishing into sharp corners.
QUALITY CONSTRUCTION - Robust maintenance free with sealed ball bearings hardened and ground essential components and zinc plating.
3 YEAR WARRANTY - Against faulty materials and workmanship even when used commercially.

Specifications

48" x 4" wide (1220 x 100mm) belt.
7" (178mm) diameter disc.
3 1/2" (89mm) diameter rubber contact wheel.
5 1/2" (140mm) diameter drive wheel.

To contact Collins Tools and Welding Supplies about Multitool Industrial Bench Grinder | PO484-250 use Get a quote.

TM400-250

Powerful 900W Induction Motor.
25mm width grinding wheels
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Run motor for maximum performance.
Heavy Duty tool rests for maximum user control.
Large eyes shield for increased user safety.

PO484

EFFICIENCY - Superior performance and a user friendly belt change of under 5 seconds.
VERSATILITY - Grinding sanding or polishing in 4 positions on rubber contact wheel platen disc or free strapping. The unit can also be swivelled vertically or any position in between.
ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there allowing for finishing into sharp corners.
QUALITY CONSTRUCTION - Robust maintenance free with sealed ball bearings hardened and ground essential components and zinc plating.
3 YEAR WARRANTY - Against faulty materials and workmanship even when used commercially.

Specifications

48" x 4" wide (1220 x 100mm) belt.
7" (178mm) diameter disc.
3 1/2" (89mm) diameter rubber contact wheel.
5 1/2" (140mm) diameter drive wheel.

Read less...

To contact Collins Tools and Welding Supplies about Multitool Industrial Bench Grinder | PO484-250 use Get a quote.

AI Overview BETA

The Multitool PO484 belt-grinding attachment and TM400-250 ITM 250 mm bench grinder form a set for bench grinding and belt work. The attachment offers four working positions using its contact wheel, platen, disc or free strapping, supporting grinding, sanding or polishing. For sharpening, shaping and refinishing tasks, the belt unit converts a traditional grinder into a workstation.

PO484 has a 3-year warranty against faulty materials and workmanship, including commercial use
Belt changes take under 5 seconds
900 W induction motor with capacitor start-run
Large eye shield on the grinder
Belt: 48" x 4" (1220 x 100 mm)

Source: listing by Collins Tools and Welding Supplies on IndustrySearch · Updated 1 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Collins Tools and Welding Supplies provide you with a quote