Unimig Multi Process Welder - MIG/TIG/Stick ...

Unimig - Multi Process Welder - MIG/TIG/Stick | Razor 500 SWF | KUMJRRW500SWF

Supplier: Collins Tools and Welding Supplies

Multi Process Welder - MIG/TIG/Stick | Razor 500 SWF | KUMJRRW500SWF

1/2

The RAZOR™ 500 SWF is a powerful workshop machine with MIG, TIG and STICK welding functions. This machine features the added flexibility of a Separate Wire Feeder unit, allowing up to 10m of extra manoeuvrability in the workshop.

In Stock

Built with solid construction, this machine is designed to withstand the toughest conditions. The RAZOR™ 500 SWF is also Spool Gun and Push-Pull Gun ready, providing MIG welding capabilities across every spool size.

The RAZOR™ SWF series is designed for superior performance and maneuverability, offering the highest quality of welds from UNIMIG’s range.

Features of this product

MULTI PROCESS WELDING: This three in one machine, lets you perform MIG, TIG and STICK welding all on one machine. There is also support for both gas shielded MIG and gasless MIG wire. There is no need to swap between machines, saving you time and setup.
THREE-PHASE: 415V power
SPOOL GUN READY: For softer wires, such as aluminium; This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed. This also assists with using longer MIG Torches.
SEPARATE WIRE FEEDER: Adds up to 10m of extra maneuverability; This machine includes a Separate Wire Feeder unit with the added benefit of being able to remove the wire feeder from the power source up to a distance of 10m. This is perfect for workshops when moving a complete machine isn’t an option.
FOUR GEARED WIRE DRIVE: For smoothest wire feeding; This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed. This also assists with using longer MIG Torches.
PUSH-PULL READY: Push-Pull Guns provide the smoothest wire speed, especially when MIG welding Aluminium. The ‘Pull’ motor in the torch allows the wire to be fed over a much longer distance, giving you more flexibility to move and maneuver whilst MIG welding.
HIGHEST QUALITY WELDS: Offering nothing but the best, this machine has been designed to offer the highest quality welds available from UNIMIG. With superior welding technology, no corners have been cut to make this machine the most powerful in its class.

Specifications of this product

MACHINE SPECIFICATIONS
PRIMARY INPUT VOLTAGE	415V Three-Phase
SUPPLY PLUG	No plug supplied (32 AMP Recommended)
RATED INPUT POWER (kVA)	25.3
Ieff (A)	24.3
RATED OUTPUT	50A/17V – 500A/39.0V
NO LOAD VOLTAGE (V)	85
PROTECTION CLASS	IP23
INSULATION CLASS	F
POWER FACTOR	0.93
MINIMUM GENERATOR (kVA)	26.0
DINSE CONNECTOR	35/50
STANDARD	AS/NZ60974-1
SUITABLE MATERIAL	Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper
WARRANTY (Years)	3
MIG SPECIFICATIONS
MIG WELDING CURRENT RANGE	50-500A
MIG DUTY CYCLE @ 40°C	60% @ 500A
MIG WIRE SIZE RANGE	0.6-1.6mm
MIG WIRE SPOOL SIZE	5kg / 15kg
MIG WELDING THICKNESS RANGE	1-30mm
DRIVE ROLLER SIZE	30/10 (x2)
TIG SPECIFICATIONS
TIG FUNCTION TYPE	DC Lift Arc
TIG WELDING CURRENT RANGE	20-500A
TIG DUTY CYCLE @ 40°C	60% @ 500A
TIG WELDING THICKNESS RANGE	2-10mm
STICK SPECIFICATIONS
STICK WELDING CURRENT RANGE	20-500A
STICK DUTY CYCLE @ 40°C	60% @ 500A
STICK ELECTRODE RANGE	2.5-6.0mm
STICK WELDING THICKNESS RANGE	2-20mm
SIZE & WEIGHT
DIMENSIONS (mm)	595x280x440mm
WEIGHT (kg)	43kg
SWF DIMENSIONS (mm)	630x235x420mm
SWF WEIGHT (kg)	14kg
SWF INTERLOCKING CABLE LENGTH (m)	10m
MACHINE FEATURES
WIRE DRIVE	Separate 4 Geared
VRD	Yes
SPOOL GUN CONNECTION	Yes
PUSH / PULL GUN CONNECTION	Yes
BURNBACK ADJUSTMENT	Synergic
WIRE INCH	Yes
INDUCTANCE CONTROL	Yes
CRATER CURRENT CONTROL	Yes
THERMAL OVERLOAD PROTECTION	Over Temperature Warning
AIR ARC GOUGING	Yes

To contact Collins Tools and Welding Supplies about Unimig Multi Process Welder - MIG/TIG/Stick | Razor 500 SWF | KUMJRRW500SWF use Get a quote.

The RAZOR™ SWF series is designed for superior performance and maneuverability, offering the highest quality of welds from UNIMIG’s range.

Features of this product

MULTI PROCESS WELDING: This three in one machine, lets you perform MIG, TIG and STICK welding all on one machine. There is also support for both gas shielded MIG and gasless MIG wire. There is no need to swap between machines, saving you time and setup.
THREE-PHASE: 415V power
SPOOL GUN READY: For softer wires, such as aluminium; This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed. This also assists with using longer MIG Torches.
SEPARATE WIRE FEEDER: Adds up to 10m of extra maneuverability; This machine includes a Separate Wire Feeder unit with the added benefit of being able to remove the wire feeder from the power source up to a distance of 10m. This is perfect for workshops when moving a complete machine isn’t an option.
FOUR GEARED WIRE DRIVE: For smoothest wire feeding; This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed. This also assists with using longer MIG Torches.
PUSH-PULL READY: Push-Pull Guns provide the smoothest wire speed, especially when MIG welding Aluminium. The ‘Pull’ motor in the torch allows the wire to be fed over a much longer distance, giving you more flexibility to move and maneuver whilst MIG welding.
HIGHEST QUALITY WELDS: Offering nothing but the best, this machine has been designed to offer the highest quality welds available from UNIMIG. With superior welding technology, no corners have been cut to make this machine the most powerful in its class.

Specifications of this product

MACHINE SPECIFICATIONS
PRIMARY INPUT VOLTAGE	415V Three-Phase
SUPPLY PLUG	No plug supplied (32 AMP Recommended)
RATED INPUT POWER (kVA)	25.3
Ieff (A)	24.3
RATED OUTPUT	50A/17V – 500A/39.0V
NO LOAD VOLTAGE (V)	85
PROTECTION CLASS	IP23
INSULATION CLASS	F
POWER FACTOR	0.93
MINIMUM GENERATOR (kVA)	26.0
DINSE CONNECTOR	35/50
STANDARD	AS/NZ60974-1
SUITABLE MATERIAL	Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper
WARRANTY (Years)	3
MIG SPECIFICATIONS
MIG WELDING CURRENT RANGE	50-500A
MIG DUTY CYCLE @ 40°C	60% @ 500A
MIG WIRE SIZE RANGE	0.6-1.6mm
MIG WIRE SPOOL SIZE	5kg / 15kg
MIG WELDING THICKNESS RANGE	1-30mm
DRIVE ROLLER SIZE	30/10 (x2)
TIG SPECIFICATIONS
TIG FUNCTION TYPE	DC Lift Arc
TIG WELDING CURRENT RANGE	20-500A
TIG DUTY CYCLE @ 40°C	60% @ 500A
TIG WELDING THICKNESS RANGE	2-10mm
STICK SPECIFICATIONS
STICK WELDING CURRENT RANGE	20-500A
STICK DUTY CYCLE @ 40°C	60% @ 500A
STICK ELECTRODE RANGE	2.5-6.0mm
STICK WELDING THICKNESS RANGE	2-20mm
SIZE & WEIGHT
DIMENSIONS (mm)	595x280x440mm
WEIGHT (kg)	43kg
SWF DIMENSIONS (mm)	630x235x420mm
SWF WEIGHT (kg)	14kg
SWF INTERLOCKING CABLE LENGTH (m)	10m
MACHINE FEATURES
WIRE DRIVE	Separate 4 Geared
VRD	Yes
SPOOL GUN CONNECTION	Yes
PUSH / PULL GUN CONNECTION	Yes
BURNBACK ADJUSTMENT	Synergic
WIRE INCH	Yes
INDUCTANCE CONTROL	Yes
CRATER CURRENT CONTROL	Yes
THERMAL OVERLOAD PROTECTION	Over Temperature Warning
AIR ARC GOUGING	Yes