A new innovative and very compact sensor called USB 150 is introduced with a 200 mm measuring range (50-250 mm). Ideal for research applications as we as many others.
The sensor use a standard USB interface for Windows as well as Unix environments. Cables are fitted with a micro-B connector at the sensor end and a USB-A connector at the other end.
As a novelty the sensor also work in ASCII Mode.
The measuring frequency is 1 kHz and the sensor operates either in BINARY MODE (The normal ODS sensor fashion with 3 byte telegrams, and a nominal resolution of the converted integer number of 0,01 mm, this makes it compatible with all ODS sensors, including Select programming) or in ASCII MODE, where a baud rate of 115200 baud is needed for operating at the full measuring frequency of 1 kHz. A special feature of ASCII MODE is that by sending a capital "Q" a single measuring value is presented. See backside of the attached Data Sheet for further details about specifications and this protocol.
Measuring range 50 --- 250 mm Centre distance 150 mm Resolution 0.01 --- 0.03 mm Linearity ± 0.05 mm Reproducibility ± Resolution Updating frequency 1000 Hz Temperature deviation app. ± 0.03% of FS/°C Light source visible laser (655 nm) Size of light spot app. Ø 2 mm Laser protection class IEC 2
Digital output as Binary or ASCII USB 2.0 ASCII protocol see backside of Data sheet. Environ¬ment data
Operating temperature 0 - +50 °C Storage temperature -20 - +70 °C Humidity (non con¬¬densing) Max 90 % RH Degree of protection IEC IP65
Dimensions WxHxD 48x40x19.5 mm Weight 55 gram without cable Connector USB micro-B Housing aluminium/glass
Electrical data Supply voltage 5 V via USB connector Power consumption, max 0.75 W
For more information or a quote please call or use the IndustrySearch email for a direct reply.
Quality in Control | Control & Process Technology
Quality In Control is an Australian supplier of leading quality control and process technology pre-dominantly for the following industries:
- Plastic & Rubber extrusion
- Automotive & Metal forming