Flexibility and increasing cost pressures have been an important topic for years when it comes to monitoring of production and assembly processes and the automation of test rigs. This situation forces companies involved in plant and equipment construction to use as many rationalisation measures as possible.
Development in the field bus sector offers the potential for innovation and cost saving. In order to be able to make use of this potential, signal processing must satisfy new demands. The solution for signal processing is called " PME" - the intelligent product line for industrial measurement technique.
The appropriate modules for your measurement task:
The PME range of products offer different types of modules for recording of all measured quantities relevant to processing, such as force, displacement, pressure, temperature, speed, frequency and torque.
Due to its modularity the PME system enables measured signals from different transducer types to be conditioned uniformly. All measuring modules come with an LCD display, keypad and a CAN interface, 4 digital I/Os, changeover analog output (+/- 10V, 4...20 mA, +/- 20 mA), 4 limit value switches, 2 peak value stores and 4 parameter set memories:
Our recommendation: MP85A/MP85ADP FASTpress - The amplifier for monitoring fitting processes
MP01 - Multichannel amplifier DC amplifier; 4 channels for voltage, current, and thermocouples or 2 channels for PT100 and resistors; Subcon5 connector; 0.1 accuracy class
MP30 - Single channel amplifier 600 Hz carrier frequency amplifier for strain gage transducers; 0.05...20 Hz filter; autocalibration; 0.03 accuracy class
MP30DP - Single channel amplifier 600 Hz carrier frequency amplifier with the same characteristics as MP30; however, with additional Profibus DP interface
MP55 - Single channel amplifier 4.8 kHz carrier frequency amplifier for strain gage and inductive transducers in full and half bridge circuit; 0.05 ... 500 Hz filter; 0.1 accuracy class
MP55DP - Single channel amplifier 4.8 kHz carrier frequency amplifier with the same characteristics as MP55; however, with additional Profibus interface
MP55IBS - Single channel amplifier 4.8 kHz carrier frequency amplifier with the same characteristics as MP55; however, with additional Interbus S interface
MP60 - Single channel amplifier for incremental transducers Frequency measuring module for incremental transmitters and HBM torque flanges with frequency output; 0.05 accuracy class
MP60DP - Single channel amplifier for incremental transducers Frequency measuring module with the same characteristics as MP60; however, with additional Profibus DP interface
MP07 - Supply voltage module for type T10F-KF1 torque modules Supply voltage module for type T10F KF1 torque transducers.
MP70DP - Profibus interface Gateway from CANopen to Profibus DP; up to 8 PME channels can be connected via CAN; enables gateway functions and mathematical functions to be realized.
HBM Australia | measure and predict with confidence
HBM – Products and services from virtual to physical testing
For over 60 years, the name HBM stands for reliability, precision and innovation all over the world. The ...