Pneumatic Conveying System up to 6000kg/hr ...

Pneumatic Conveying System up to 6000kg/hr | Mircoveyor

Supplier: Premier Tech Systems and Automation

1/5

The K2M Series of Microveyor pneumatic conveying system has been developed to cope with the lower end of the “dense phase” transfer of powder or granular products. With well over 50 versions there is a model suited to virtually every application.

“Fit and forget” equipment

Receive 1-3 days from order

The Microveyor offers an economic conveying solution designed for low transfer rates generally up to 6000kg/hr. For higher conveying rates see our Dense Phase Conveying Systems.

Most applications are in the 10-100m long range, however distances up to 200m are also possible, particularly with fine and superfine powders.

As with any pneumatic conveying system the convenience of a pipeline prevails, allowing the system to negotiate around existing equipment and structures.

The Microveyor is well suited to collecting material from a single source and then blowing it to multiple destinations.

Configuration

The Microveyor is available with two basic valve options; the Inflatable Seat Posiflate Butterfly Valve and the heavy-duty rugged Dome Valve which is ideal when handling abrasive powders or where high temperatures are present.

The Microveyor may be configured to run from a plant air supply or our dedicated Wing Compressor power pack.

We offer full turnkey pneumatic conveying solutions including custom designs, manufacturing, installation and commissioning. Our designs are proven and tested in our own in-house product testing facility.

Applications

Typical applications for the Microveyor are under bag houses and dust collectors, silos and hoppers, bulk bag dischargers and sack tipping stations. For higher conveying rates see our “Dense Phase Conveying Systems”.

Bulk materials

Common materials handled: cement, fly ash, bentonite, gypsum, lime, magnesium oxide, barites, carbon black, calcite, plaster, sand, soda ash, sugar, stearic acid, limestone, calcium carbonate, roasted coffee beans, pvc powder, flour, maize grits, rice, flocculants, and many others.

Rates: up to 6 tonnes per hour
Distances: 5 to 200 meters
Bulk materials: powders, granules, pellets, and flakes

Features

Cost-efficient

Simple and economical solution to move powders around plants

Ease of use

Automated for simplicity
“Fit and forget” equipment

High-quality design

Greater flexibility in transferring powder through congested plants using pipelines
Simple heavy-duty design with only one valve in contact with the material
Fast-acting posiflate inflatable seat butterfly valves for rapid shut-off
Heavy duty dome valves for use with abrasives

Options

High temperature upgrades
Blower packs
Up and down stream hoppers complete with ancillaries
Wide variety of pipe, bends, and diverter valve options

To contact Premier Tech Systems and Automation about Pneumatic Conveying System up to 6000kg/hr | Mircoveyor use Get a quote.

The Microveyor offers an economic conveying solution designed for low transfer rates generally up to 6000kg/hr. For higher conveying rates see our Dense Phase Conveying Systems.

Most applications are in the 10-100m long range, however distances up to 200m are also possible, particularly with fine and superfine powders.

As with any pneumatic conveying system the convenience of a pipeline prevails, allowing the system to negotiate around existing equipment and structures.

The Microveyor is well suited to collecting material from a single source and then blowing it to multiple destinations.

Configuration

The Microveyor may be configured to run from a plant air supply or our dedicated Wing Compressor power pack.

Applications

Bulk materials

Rates: up to 6 tonnes per hour
Distances: 5 to 200 meters
Bulk materials: powders, granules, pellets, and flakes

Features

Cost-efficient

Simple and economical solution to move powders around plants

Ease of use

Automated for simplicity
“Fit and forget” equipment

High-quality design

Greater flexibility in transferring powder through congested plants using pipelines
Simple heavy-duty design with only one valve in contact with the material
Fast-acting posiflate inflatable seat butterfly valves for rapid shut-off
Heavy duty dome valves for use with abrasives

Options

High temperature upgrades
Blower packs
Up and down stream hoppers complete with ancillaries
Wide variety of pipe, bends, and diverter valve options

Read less...

To contact Premier Tech Systems and Automation about Pneumatic Conveying System up to 6000kg/hr | Mircoveyor use Get a quote.

AI Overview BETA

The Microveyor K2M Series is a pneumatic conveying system that transfers powders and granular materials through a pipeline at rates up to 6 tonnes per hour. Its pipeline can route around existing equipment and structures, helping move material through congested plant layouts. Plants collecting material from a single source can send it to multiple destinations.

Most: 10–100 m; up to 200 m, especially with fine and superfine powders
Handles powders, granules, pellets and flakes
Dome valve option for abrasive powders or applications involving high temperatures
Runs from plant air or a dedicated Wing Compressor power pack
Turnkey projects include custom design, manufacturing, installation and commissioning

Source: listing by Premier Tech Systems and Automation on IndustrySearch · Updated 2 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Premier Tech Systems and Automation provide you with a quote

Supplier

Supplier: Premier Tech Systems and Automation

Distribution: Australia and New Zealand

Location: Heidelberg West, VIC

Customers: Food, pharmaceutical, mining, industrial, fertilizer, cement, organics, seeds, nuts

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Premier Tech Systems and Automation are also proudly displaying these credentials:

Established:

1950

Employees:

21-50

Customers:

Food, pharmaceutical, mining, industrial, fertilizer, cement, organics, seeds, nuts

Memberships:

AORA (organics association), ATMA (milling association), APPEX (packaging association), AS

Certifications:

N/A

Distribution:

Australia and New Zealand