Data is transmitted wirelessly via a WiFi network to a PC and viewed using the included software package. During configuration the sensor will search for an existing wireless network while physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application (max 60 days at 10 second sample interval). The range of the sensor can be increased by using WiFi extenders.
This WiFi-502 is a low powered battery device. When configured using typical sampling periods (e.g. once every 60 seconds) the sensor will operate for over one year. The battery can then be recharged via a PC or USB +5 V wall adapter using the USB lead provided. The battery is safely charged when the unit is operating between 0 to +40 °C (+32 to +104 °F). It is protected against charging outside this temperature range. Sensor readings may be inaccurate during battery charging. The software installed on the PC will allow set-up, data logging, and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, logged data can be viewed via the graphing tool or exported into Excel. This sensor stands alone by itself on a horizontal surface and comes with a wall bracket that can be screwed onto a wall or flat surface. The sensor clips into the bracket.
Measure temperature and humidity while transferring data via WiFi to a PC
Built-in data display
Measurement range from -20 to +60 °C (-4 to +140 °F)
Capable of logging greater than 500,000 data set entries
Sensor memory stores all data even if WiFi is temporarily disconnected
Rechargeable internal battery
Configurable high/low alarms
Included software for set-up, logging, and data review
View and analyze multiple WiFi-502 sensors, including immediate graphing of logged data
Supported Operating Systems: Windows® 7/Vista/XP SP2, 32-bit or 64-bit
Firetail DAQ | Data Acquisition Technology
Firetail DAQ was established in June 2006 as the Australian distributor for Measurement Computing Corporation (MCC) of the USA by Roger Cawsey. Our product range has now expanded to include IOtech ...