PSSS Cold Cutting Machine | Excalibur

PSSS - Cold Cutting Machine | Excalibur

Cold Cutting Machine | Excalibur

Have a large cutting requirement? Talk to us about a custom made Excalibur Cold Cutting Machine!

In Stock

Features of this product

Cuts pipe up to 2” (50mm) thickness
Bevels high tensile stainless-steel pipe
Market leader in cutting and bevelling
Manufactured in the EU, to EU Machinery Directive 2006/42/ EC,
Cuts and bevels most machinable materials; carbon steel, stainless steel, ductile iron, cast iron and most other alloys without spark or flame.
The heavy-duty chain tensioning mechanism is encased in a high strength alloy frame provides the required rigidity and strength for cutting the pipe at the highest travel speed possible.
The frame of the Excalibur has six wheel positions to follow the radius of the pipe and allow tracking accuracy on a 36” pipe of better than 0.3mm
Equipped with a two-speed drive gearbox providing positive movement of the machine around the pipe in all cutting conditions
No out-of-round compensation is required as the machine follows the pipe’s outside diameter, producing an even and consistent cut.
The drive chain can be adjusted to accommodate pipes from 6” to 5 meters in diameter (and beyond).
Driven by two highly reliable, heavy duty pneumatic air motors; a 2.75KW motor coupled to the heavy-duty transmission rotating the cutting blades up to 71RPM and a 56KW motor connected to the two speed transmission which moves the machine around the pipe.
Beveling blades in various configurations; 30°/ 37.5° beveling angles and ‘U’ joint and ‘J’ prep included
A 10 bar @ 4000l/m Compressor is required for operation.
Works in the most extreme temperatures

To contact Piping Specialty Supply Service about PSSS Cold Cutting Machine | Excalibur use Get a quote.

Features of this product

Cuts pipe up to 2” (50mm) thickness
Bevels high tensile stainless-steel pipe
Market leader in cutting and bevelling
Manufactured in the EU, to EU Machinery Directive 2006/42/ EC,
Cuts and bevels most machinable materials; carbon steel, stainless steel, ductile iron, cast iron and most other alloys without spark or flame.
The heavy-duty chain tensioning mechanism is encased in a high strength alloy frame provides the required rigidity and strength for cutting the pipe at the highest travel speed possible.
The frame of the Excalibur has six wheel positions to follow the radius of the pipe and allow tracking accuracy on a 36” pipe of better than 0.3mm
Equipped with a two-speed drive gearbox providing positive movement of the machine around the pipe in all cutting conditions
No out-of-round compensation is required as the machine follows the pipe’s outside diameter, producing an even and consistent cut.
The drive chain can be adjusted to accommodate pipes from 6” to 5 meters in diameter (and beyond).
Driven by two highly reliable, heavy duty pneumatic air motors; a 2.75KW motor coupled to the heavy-duty transmission rotating the cutting blades up to 71RPM and a 56KW motor connected to the two speed transmission which moves the machine around the pipe.
Beveling blades in various configurations; 30°/ 37.5° beveling angles and ‘U’ joint and ‘J’ prep included
A 10 bar @ 4000l/m Compressor is required for operation.
Works in the most extreme temperatures