Rav 4 Post Truck Hoist Lift | 6.5 t

Rav - 4 Post Truck Hoist Lift | 6.5 t

Supplier: The Boss Shop

4 Post Truck Hoist Lift | 6.5 t

6.5 t, electrohydraulic, symmetrical, with level runways, track length 5700 mm, wheel alignment optional, above ground

In Stock

Features of this product

The hydraulic cylinder is located inside the fixed platform and is thus perfectly protected
High-resistant, galvanised and pre-stretched metal cables
Large-diameter pulleys with self-lubricating and maintenance-free bushes
Automatic mechanical back-up safety devices (every 100 mm) with pneumatic release allowing stationary operation with unladen cables
Immediate-triggering safety stud devices in case a cable slackens or fails
Automatic anti-toe trap alarm during final stages of lift descent
Mechanical, electrical and hydraulic safety devices in compliance with the prevailing standard for CE marking
Low-voltage (24 V) electrical system with control circuit

To contact The Boss Shop about Rav 4 Post Truck Hoist Lift | 6.5 t use Get a quote.

Features of this product

The hydraulic cylinder is located inside the fixed platform and is thus perfectly protected
High-resistant, galvanised and pre-stretched metal cables
Large-diameter pulleys with self-lubricating and maintenance-free bushes
Automatic mechanical back-up safety devices (every 100 mm) with pneumatic release allowing stationary operation with unladen cables
Immediate-triggering safety stud devices in case a cable slackens or fails
Automatic anti-toe trap alarm during final stages of lift descent
Mechanical, electrical and hydraulic safety devices in compliance with the prevailing standard for CE marking
Low-voltage (24 V) electrical system with control circuit

Read less...

To contact The Boss Shop about Rav 4 Post Truck Hoist Lift | 6.5 t use Get a quote.

AI Overview BETA

The Rav 6.5 t four-post truck hoist raises vehicles on level runways using an electrohydraulic system, with a symmetrical layout and above-ground installation. Automatic mechanical backup safety devices are spaced at 100 mm intervals and release pneumatically, allowing stationary operation with unladen cables. Automotive workshops that perform wheel alignment can choose the optional alignment feature for those jobs.