Roladuct Oval Ducts
Roladuct - Oval Ducts
Roladuct Spiral Flat-Oval duct is machine-formed from Roladuct Round Spiral Tubing. The flat-oval shape is specifically designed for low head room and restricted space locations which cannot accept round duct.
Spiral Flat-Oval Compared with Rectangular Duct
The Spiral Flat-Oval has considerably less flat surface than rectangular duct. If the springy structure of flat-oval is adequately dampered, it has less surface susceptible to vibration. Thus, properly designed flat-oval duct can be superior in performance to rectangular duct.
The characteristics of flat-oval duct parallel those of circularshaped duct closely enough that slip-joint couplings can be used. Slip-joint couplings provide easier sealing against air leaks at the joints, a significant improvement over other types of duct connections.
There is an unfortunate tendency to make a surface application of sealer over a joint and assume that this is a permanently satisfactory solution to the sealing problem. This is not the case, as surface-applied sealers are not a permanent seal. Roladuct research into materials and techniques for joint sealing has proved that the sealer must be protected by metal, such as within a slip-joint, in order to be considered a permanent seal.
The Spiral Flat-Oval coupling and joint permits the use of the same experience-proven materials and technique for sealing that have been so successful in circular duct joints.
Under certain size and pressure conditions, both flat-oval and rectangular duct must be braced and reinforced against deflection.
Flat-Oval Duct Design
The design of a duct system utilising flat-oval duct follows the same procedures used with rectangular duct.
- The system is first designed on the basis of circular duct.
- Where space limitations require the use of oval duct, the circular duct is converted to its equivalent Roladuct Spiral Flat-Oval duct by using the selection chart. This chart has been arranged in a manner that makes its uses similar to tables for rectangular duct and should be used in exactly the same way.
- Spiral Flat-Oval duct is made only in the sizes listed in selection chart. For maximum economy, select your flat-oval duct size from this table.
- For clarity, please identify flat-oval duct on your drawing by listing the minor x major axis dimensions followed by the symbol o.
To contact Roladuct about Roladuct Oval Ducts use Get a quote.
Spiral Flat-Oval Compared with Rectangular Duct
The Spiral Flat-Oval has considerably less flat surface than rectangular duct. If the springy structure of flat-oval is adequately dampered, it has less surface susceptible to vibration. Thus, properly designed flat-oval duct can be superior in performance to rectangular duct.
The characteristics of flat-oval duct parallel those of circularshaped duct closely enough that slip-joint couplings can be used. Slip-joint couplings provide easier sealing against air leaks at the joints, a significant improvement over other types of duct connections.
There is an unfortunate tendency to make a surface application of sealer over a joint and assume that this is a permanently satisfactory solution to the sealing problem. This is not the case, as surface-applied sealers are not a permanent seal. Roladuct research into materials and techniques for joint sealing has proved that the sealer must be protected by metal, such as within a slip-joint, in order to be considered a permanent seal.
The Spiral Flat-Oval coupling and joint permits the use of the same experience-proven materials and technique for sealing that have been so successful in circular duct joints.
Under certain size and pressure conditions, both flat-oval and rectangular duct must be braced and reinforced against deflection.
Flat-Oval Duct Design
The design of a duct system utilising flat-oval duct follows the same procedures used with rectangular duct.
- The system is first designed on the basis of circular duct.
- Where space limitations require the use of oval duct, the circular duct is converted to its equivalent Roladuct Spiral Flat-Oval duct by using the selection chart. This chart has been arranged in a manner that makes its uses similar to tables for rectangular duct and should be used in exactly the same way.
- Spiral Flat-Oval duct is made only in the sizes listed in selection chart. For maximum economy, select your flat-oval duct size from this table.
- For clarity, please identify flat-oval duct on your drawing by listing the minor x major axis dimensions followed by the symbol o.
To contact Roladuct about Roladuct Oval Ducts use Get a quote.
Roladuct Spiral Flat-Oval duct is machine-formed from Roladuct Round Spiral Tubing for use in duct systems. Its shallow profile suits places with limited overhead clearance where round duct will not fit. Duct systems are first designed around circular duct, then matched to Roladuct’s selection chart for the equivalent dimensions, using the same procedure as rectangular-duct tables.
- Slip-joint couplings make it easier to seal joints against air leaks
- Sealant protected by metal within slip-joints is treated as a permanent seal
- Adequately damped flat-oval duct has less vibration-susceptible surface than rectangular duct
- Under some size and pressure conditions, duct needs bracing and reinforcement
- Roladuct manufactures flat-oval duct only in sizes shown on its selection chart
Source: listing by Roladuct on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Roladuct on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
- Your delivery location?
- NSW
- VIC
- QLD
- SA
- WA
- NT
- ACT
- TAS
- New Zealand
- Papua New Guinea
- Afghanistan
- Albania
- Algeria
- Andorra
- Angola
- Antigua and Barbuda
- Argentina
- Armenia
- Austria
- Azerbaijan
- Bahamas
- Bahrain
- Bangladesh
- Barbados
- Belarus
- Belgium
- Belize
- Benin
- Bhutan
- Bolivia
- Bosnia and Herzegovina
- Botswana
- Brazil
- Brunei
- Bulgaria
- Burkina Faso
- Burma
- Burundi
- Cabo Verde
- Cambodia
- Cameroon
- Canada
- Central African Republic
- Chad
- Chile
- China
- Colombia
- Comoros
- Congo (Brazzaville)
- Congo (Kinshasa)
- Costa Rica
- Côte d'Ivoire
- Croatia
- Cuba
- Cyprus
- Czechia
- Denmark
- Djibouti
- Dominica
- Dominican Republic
- Ecuador
- Egypt
- El Salvador
- Equatorial Guinea
- Eritrea
- Estonia
- Ethiopia
- Fiji
- Finland
- France
- Gabon
- Gambia
- Georgia
- Germany
- Ghana
- Greece
- Grenada
- Guatemala
- Guinea
- Guinea-Bissau
- Guyana
- Haiti
- Holy See
- Honduras
- Hungary
- Iceland
- India
- Indonesia
- Iran
- Iraq
- Ireland
- Israel
- Italy
- Jamaica
- Japan
- Jordan
- Kazakhstan
- Kenya
- Kiribati
- Korea, North
- Korea, South
- Kosovo
- Kuwait
- Kyrgyzstan
- Laos
- Latvia
- Lebanon
- Lesotho
- Liberia
- Libya
- Liechtenstein
- Lithuania
- Luxembourg
- Macedonia
- Madagascar
- Malawi
- Malaysia
- Maldives
- Mali
- Malta
- Marshall Islands
- Mauritania
- Mauritius
- Mexico
- Federated States of Micronesia
- Moldova
- Monaco
- Mongolia
- Montenegro
- Morocco
- Mozambique
- Namibia
- Nauru
- Nepal
- Netherlands
- New Zealand
- Nicaragua
- Niger
- Nigeria
- Norway
- Oman
- Pakistan
- Palau
- Panama
- Papua New Guinea
- Paraguay
- Peru
- Philippines
- Poland
- Portugal
- Qatar
- Romania
- Russia
- Rwanda
- Saint Kitts and Nevis
- Saint Lucia
- Saint Vincent and the Grenadines
- Samoa
- San Marino
- Sao Tome and Principe
- Saudi Arabia
- Senegal
- Serbia
- Seychelles
- Sierra Leone
- Singapore
- Slovakia
- Slovenia
- Solomon Islands
- Somalia
- South Africa
- South Sudan
- Spain
- Sri Lanka
- Sudan
- Suriname
- Swaziland
- Sweden
- Switzerland
- Syria
- Taiwan
- Tajikistan
- Tanzania
- Thailand
- Timor-Leste
- Togo
- Tonga
- Trinidad and Tobago
- Tunisia
- Turkey
- Turkmenistan
- Tuvalu
- Uganda
- Ukraine
- United Arab Emirates
- United Kingdom
- United States
- Uruguay
- Uzbekistan
- Vanuatu
- Venezuela
- Vietnam
- Yemen
- Zambia
- Zimbabwe
- NSW
- VIC
- QLD
- SA
- WA
- NT
- ACT
- TAS
- New Zealand
- Papua New Guinea
- Afghanistan
- Albania
- Algeria
- Andorra
- Angola
- Antigua and Barbuda
- Argentina
- Armenia
- Austria
- Azerbaijan
- Bahamas
- Bahrain
- Bangladesh
- Barbados
- Belarus
- Belgium
- Belize
- Benin
- Bhutan
- Bolivia
- Bosnia and Herzegovina
- Botswana
- Brazil
- Brunei
- Bulgaria
- Burkina Faso
- Burma
- Burundi
- Cabo Verde
- Cambodia
- Cameroon
- Canada
- Central African Republic
- Chad
- Chile
- China
- Colombia
- Comoros
- Congo (Brazzaville)
- Congo (Kinshasa)
- Costa Rica
- Côte d'Ivoire
- Croatia
- Cuba
- Cyprus
- Czechia
- Denmark
- Djibouti
- Dominica
- Dominican Republic
- Ecuador
- Egypt
- El Salvador
- Equatorial Guinea
- Eritrea
- Estonia
- Ethiopia
- Fiji
- Finland
- France
- Gabon
- Gambia
- Georgia
- Germany
- Ghana
- Greece
- Grenada
- Guatemala
- Guinea
- Guinea-Bissau
- Guyana
- Haiti
- Holy See
- Honduras
- Hungary
- Iceland
- India
- Indonesia
- Iran
- Iraq
- Ireland
- Israel
- Italy
- Jamaica
- Japan
- Jordan
- Kazakhstan
- Kenya
- Kiribati
- Korea, North
- Korea, South
- Kosovo
- Kuwait
- Kyrgyzstan
- Laos
- Latvia
- Lebanon
- Lesotho
- Liberia
- Libya
- Liechtenstein
- Lithuania
- Luxembourg
- Macedonia
- Madagascar
- Malawi
- Malaysia
- Maldives
- Mali
- Malta
- Marshall Islands
- Mauritania
- Mauritius
- Mexico
- Federated States of Micronesia
- Moldova
- Monaco
- Mongolia
- Montenegro
- Morocco
- Mozambique
- Namibia
- Nauru
- Nepal
- Netherlands
- New Zealand
- Nicaragua
- Niger
- Nigeria
- Norway
- Oman
- Pakistan
- Palau
- Panama
- Papua New Guinea
- Paraguay
- Peru
- Philippines
- Poland
- Portugal
- Qatar
- Romania
- Russia
- Rwanda
- Saint Kitts and Nevis
- Saint Lucia
- Saint Vincent and the Grenadines
- Samoa
- San Marino
- Sao Tome and Principe
- Saudi Arabia
- Senegal
- Serbia
- Seychelles
- Sierra Leone
- Singapore
- Slovakia
- Slovenia
- Solomon Islands
- Somalia
- South Africa
- South Sudan
- Spain
- Sri Lanka
- Sudan
- Suriname
- Swaziland
- Sweden
- Switzerland
- Syria
- Taiwan
- Tajikistan
- Tanzania
- Thailand
- Timor-Leste
- Togo
- Tonga
- Trinidad and Tobago
- Tunisia
- Turkey
- Turkmenistan
- Tuvalu
- Uganda
- Ukraine
- United Arab Emirates
- United Kingdom
- United States
- Uruguay
- Uzbekistan
- Vanuatu
- Venezuela
- Vietnam
- Yemen
- Zambia
- Zimbabwe
Flexible Duct | Airduct 355
TPRD Flex, Flexible Ducting / Hose Temperature Range -40°C to +125°C
Mineflex & PVCC Flex Flexible Ducting
Nordfab Flame Retardant Flex Flexible Duct
High Temperature Flexible Ducting for Foundries
Flex Ducting | Food Grade | IFLEX PUR-M
Flexible Ducting | NEW PUAS-M
NEW! Flexible Ducting PUR-CNC
Flexible Ducting
Lightpaths Optical Fibre Ducting System
Air Conditioning Ducts
Ventilation Ducting | Protan Ventiflex Ducting
Oval Duct
Round Spiral Ducting
Flexible Ducting | Polyurethane | PolyFlex Light
Flexible Ducting | Thermoplastic | SunFlex
Semi Rigid Ducting | 200mm Diameter – 3m Length
Fabric Reinforced Spiral (FRS) Flexible Ducting
Spiral Lockseam Ducting
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product
