Samson Material Feeder

Samson - Material Feeder

Supplier: Ammermann

Material Feeder

1/3

The Samson® surface feeder extracts bulk materials directly from the truck but is also used for wagon unloading as well as in bulk material handling with front end loaders.

In Stock

A frequent application is the conveying of corrective materials, additives or alternative fuels. Owing to its flexibility it is a technically and economically good solution in many areas of bulk material handling.

Functions & Features

Controlled discharge of bulk materials from trucks
Suitable for dry and dusty, heavy and abrasive as well as for wet and sticky materials
No expensive bunker necessary
High flexibility
No bridge formation or blockages
Low dust generation owing to modest drop height and volume controlled discharge

How does the SAMSON Material Feeder work?

The SAMSON Material Feeder operates very easily. The wide apron belt design permits a very low loading height allowing trucks to discharge directly to the entry section of the unit.

Material is discharged directly into the entry section.
Material is then drawn directly from the truck onto the forward moving apron belt into the unit.
Material can either be continually discharged to a following conveyor system or can be stored within the unit.
Once the material in the unit has been moved onto the next process stage, the entry section of the SAMSON Material Feeder then becomes ready to accept the next load of material.

To contact Ammermann about Samson Material Feeder use Get a quote.

Functions & Features

Controlled discharge of bulk materials from trucks
Suitable for dry and dusty, heavy and abrasive as well as for wet and sticky materials
No expensive bunker necessary
High flexibility
No bridge formation or blockages
Low dust generation owing to modest drop height and volume controlled discharge

How does the SAMSON Material Feeder work?

The SAMSON Material Feeder operates very easily. The wide apron belt design permits a very low loading height allowing trucks to discharge directly to the entry section of the unit.

Material is discharged directly into the entry section.
Material is then drawn directly from the truck onto the forward moving apron belt into the unit.
Material can either be continually discharged to a following conveyor system or can be stored within the unit.
Once the material in the unit has been moved onto the next process stage, the entry section of the SAMSON Material Feeder then becomes ready to accept the next load of material.

Read less...

To contact Ammermann about Samson Material Feeder use Get a quote.

AM-Samson-Material-Feeder-Brochure(3.21MB)

AI Overview BETA

The Samson Material Feeder is an apron machine that receives bulk loads from trucks, wagons and front-end loaders. Its wide apron belt allows trucks to unload directly into the entry section at a low loading height. Bulk-handling operations using corrective materials, additives or alternative fuels can store a load inside the unit until the next process stage is ready.

Entry section accepts another load once material moves to the next process stage
Handles dry and dusty, heavy and abrasive, wet and sticky materials
Modest drop height and volume-controlled discharge reduce dust generation
No expensive bunker is needed
Prevents bridge formation and blockages

Source: listing by Ammermann on IndustrySearch · Updated 2 Nov 2026
Supplier document: AM-Samson-Material-Feeder-Brochure (PDF)

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Ammermann provide you with a quote