Senator DS Series Rotary Screw Air Compressors ...

Senator - DS Series Rotary Screw Air Compressors

Supplier: Glenco Air & Power

DS Series Rotary Screw Air Compressors

1/6

Senator DS Series base-mounted rotary screw air compressors offer 4 to 90 kW motors and 100% duty cycle, with German-engineered, oil-lubricated EU COMP air ends.

100% duty cycle

Overview

New base-mounted compressors for industrial applications with a steady compressed-air demand; capable of 100% duty cycle.
Designs proven throughout Asia and Europe, with thousands of units in service, and refined using Australian end-user feedback.
12-month parts and labour warranty.

Air end and drive configurations

Exclusively German-engineered, oil-lubricated EU COMP air ends, with model-matched V-belt or direct gear drive.
Third-generation 5:6 lobe rotor profile delivers more air with lower energy consumption. Fewer components and smaller manufacturing tolerances support smoother, more efficient running.
One-piece rotor enclosure casting, Viton O-rings and a unique shaft seal provide leak-free operation.
Advanced bearings provide an ISO L10 rating life of more than 100,000 hours.
DS4 to DS15: compact under-and-over arrangement; a double-ended shaft motor drives the air end by V-belts and the radial cooling fan directly.
DS18 to DS45: side-by-side arrangement; main motor drives the air end by V-belts, with a separate motor directly driving an axial cooling fan.
DS55 to DS90: inline arrangement; main motor directly couples to the geared air end, with a separate axial cooling fan motor.
DS4 to DS45 V-belt transmission provides compact dimensions and easy speed-ratio changes for different pressures.
DS55 to DS90 direct-drive transmission is virtually maintenance-free, with negligible energy loss.

AIMS controller

Air Intelligent Management System interface for operation, monitoring, protection and maintenance scheduling.
Fully automatic operation after initial push-button start.
Continuous operating status, pressure and temperature display.
Electrical phase reversal and abnormal current and voltage protection.
Over-pressure and under/over-temperature protection.
Critical maintenance scheduling and tracking.
Selectable automatic restart after mains power failure and run-time limit for maintenance enforcement.
Remote hardwired stop/start control.
Sequential control of up to eight interconnected DS Series compressors.
Modbus RS-485 data communication for standalone compressors.

Features

8, 10 & 13 bar outlet pressure capability for most industrial compressed-air applications; 16 bar models available ex-stock or upon request. DS15-16 and DS22-16 are stock products.
Soundproofed cabinet and anti-vibration mounting permit installation directly within the working environment.
Premium-efficiency IE3 class, MEPS-compliant motor reduces energy consumption; Heavy-duty Class F insulation and IP55 protection.
Star-delta starter reduces peak energy demand and mechanical and electrical shock-loading.
Inlet air filter with integrated cyclonic pre-separation, high dust capacity and low pressure drop for long service life.
Inlet valve has fewer wearing parts, low pressure loss and reduced noise. DS55 to DS90 include adjustable modulating control for continuous flow regulation.
Oversized air-oil receiver optimises separation and increases lubricating oil capacity.
External spin-on (= DS6) or internal cartridge (= DS8) air-oil separator ensures the lowest residual discharge-air oil content.
Fan-forced discharge after-cooling improves downstream air-treatment efficiency on DS8 and larger models.
Thermostat-controlled, fan-forced oil cooling permits continuous operation in ambient temperatures up to 45°C.
Lift-off panels and ample internal space provide unhindered maintenance access.
Compliant with Australian Work Health and Safety Regulations for industrial workplace use.
Illustrated components include cooling and suction air pre-filter, minimum pressure valve, electrical cabinet, vibration isolators, pressure gauge, safety valve, controller, emergency stop button, base frame, V-belt tension adjuster, electrical supply cable entry, oil filter, drive coupling, air outlet, drain valve, oil level gauge, thermostatic valve and oil fill plug.

Specifications

Specification	Value
Brand	Senator
Series	DS Series
Condition	New
Duty cycle	100%
Electricity supply	400 V, 3-Ph, 50 Hz
Free Air Delivery	per ISO 1217:2009 Annex E

MODEL	Free Air Delivery 8 bar (m3/min)	Free Air Delivery 10 bar (m3/min)	Free Air Delivery 13 bar (m3/min)	Free Air Delivery 16 bar (m3/min)	Motor kW	Noise@ 1 m dB(A)	Air Outlet inch	Dimensions W mm	Dimensions D mm	Dimensions H mm	Weight kg
DS4	0.50	0.40	0.35		4	65	1/2	660	600	890	209
DS6	0.75	0.65	0.50		5.5	65	1/2	660	600	890	210
DS8	1.02	0.95	0.83	0.60	7.5	66	3/4	800	800	995	312
DS11	1.65	1.50	1.40	1.00	11	67	3/4	880	830	1,075	362
DS15	2.40	2.05	1.85	1.45 #	15	68	3/4	880	830	1,075	423
DS18	2.95	2.55	2.30	1.70	18.5	70	1-1/4	1,050	880	1,260	502
DS22	3.60	3.40	3.00	2.20 #	22	70	1-1/4	1,050	880	1,260	529
DS30	5.20	4.60	4.05	2.90	30	72	1-1/2	1,000	1,250	1,310	723
DS37	6.30	5.75	5.05	3.80	37	72	1-1/2	1,000	1,250	1,310	751
DS45	7.60	6.90	6.30	4.85	45	75	2	1,400	1,100	1,600	952
DS55	9.60	8.80	8.10	5.85	55	75	2	2,250	1,344	1,694	1,500
DS75	13.00	11.70	10.25	7.90	75	75	2	2,250	1,344	1,694	1,660
DS90	15.20	13.60	12.30	9.90	90	75	2	2,250	1,344	1,694	1,680

DS15-16 and DS22-16 are stock products; other 16 bar models are available upon request.

Accessories and packages

Matching vertical air receivers, refrigerant dryers and in-line filters are available separately or in optimally pre-configured compressor packages.
Packages suit most industrial applications and combine performance, safety and affordability.

Overview

New base-mounted compressors for industrial applications with a steady compressed-air demand; capable of 100% duty cycle.
Designs proven throughout Asia and Europe, with thousands of units in service, and refined using Australian end-user feedback.
12-month parts and labour warranty.

Air end and drive configurations

Exclusively German-engineered, oil-lubricated EU COMP air ends, with model-matched V-belt or direct gear drive.
Third-generation 5:6 lobe rotor profile delivers more air with lower energy consumption. Fewer components and smaller manufacturing tolerances support smoother, more efficient running.
One-piece rotor enclosure casting, Viton O-rings and a unique shaft seal provide leak-free operation.
Advanced bearings provide an ISO L10 rating life of more than 100,000 hours.
DS4 to DS15: compact under-and-over arrangement; a double-ended shaft motor drives the air end by V-belts and the radial cooling fan directly.
DS18 to DS45: side-by-side arrangement; main motor drives the air end by V-belts, with a separate motor directly driving an axial cooling fan.
DS55 to DS90: inline arrangement; main motor directly couples to the geared air end, with a separate axial cooling fan motor.
DS4 to DS45 V-belt transmission provides compact dimensions and easy speed-ratio changes for different pressures.
DS55 to DS90 direct-drive transmission is virtually maintenance-free, with negligible energy loss.

AIMS controller

Air Intelligent Management System interface for operation, monitoring, protection and maintenance scheduling.
Fully automatic operation after initial push-button start.
Continuous operating status, pressure and temperature display.
Electrical phase reversal and abnormal current and voltage protection.
Over-pressure and under/over-temperature protection.
Critical maintenance scheduling and tracking.
Selectable automatic restart after mains power failure and run-time limit for maintenance enforcement.
Remote hardwired stop/start control.
Sequential control of up to eight interconnected DS Series compressors.
Modbus RS-485 data communication for standalone compressors.

Features

8, 10 & 13 bar outlet pressure capability for most industrial compressed-air applications; 16 bar models available ex-stock or upon request. DS15-16 and DS22-16 are stock products.
Soundproofed cabinet and anti-vibration mounting permit installation directly within the working environment.
Premium-efficiency IE3 class, MEPS-compliant motor reduces energy consumption; Heavy-duty Class F insulation and IP55 protection.
Star-delta starter reduces peak energy demand and mechanical and electrical shock-loading.
Inlet air filter with integrated cyclonic pre-separation, high dust capacity and low pressure drop for long service life.
Inlet valve has fewer wearing parts, low pressure loss and reduced noise. DS55 to DS90 include adjustable modulating control for continuous flow regulation.
Oversized air-oil receiver optimises separation and increases lubricating oil capacity.
External spin-on (= DS6) or internal cartridge (= DS8) air-oil separator ensures the lowest residual discharge-air oil content.
Fan-forced discharge after-cooling improves downstream air-treatment efficiency on DS8 and larger models.
Thermostat-controlled, fan-forced oil cooling permits continuous operation in ambient temperatures up to 45°C.
Lift-off panels and ample internal space provide unhindered maintenance access.
Compliant with Australian Work Health and Safety Regulations for industrial workplace use.
Illustrated components include cooling and suction air pre-filter, minimum pressure valve, electrical cabinet, vibration isolators, pressure gauge, safety valve, controller, emergency stop button, base frame, V-belt tension adjuster, electrical supply cable entry, oil filter, drive coupling, air outlet, drain valve, oil level gauge, thermostatic valve and oil fill plug.

Specifications

Specification	Value
Brand	Senator
Series	DS Series
Condition	New
Duty cycle	100%
Electricity supply	400 V, 3-Ph, 50 Hz
Free Air Delivery	per ISO 1217:2009 Annex E

MODEL	Free Air Delivery 8 bar (m3/min)	Free Air Delivery 10 bar (m3/min)	Free Air Delivery 13 bar (m3/min)	Free Air Delivery 16 bar (m3/min)	Motor kW	Noise@ 1 m dB(A)	Air Outlet inch	Dimensions W mm	Dimensions D mm	Dimensions H mm	Weight kg
DS4	0.50	0.40	0.35		4	65	1/2	660	600	890	209
DS6	0.75	0.65	0.50		5.5	65	1/2	660	600	890	210
DS8	1.02	0.95	0.83	0.60	7.5	66	3/4	800	800	995	312
DS11	1.65	1.50	1.40	1.00	11	67	3/4	880	830	1,075	362
DS15	2.40	2.05	1.85	1.45 #	15	68	3/4	880	830	1,075	423
DS18	2.95	2.55	2.30	1.70	18.5	70	1-1/4	1,050	880	1,260	502
DS22	3.60	3.40	3.00	2.20 #	22	70	1-1/4	1,050	880	1,260	529
DS30	5.20	4.60	4.05	2.90	30	72	1-1/2	1,000	1,250	1,310	723
DS37	6.30	5.75	5.05	3.80	37	72	1-1/2	1,000	1,250	1,310	751
DS45	7.60	6.90	6.30	4.85	45	75	2	1,400	1,100	1,600	952
DS55	9.60	8.80	8.10	5.85	55	75	2	2,250	1,344	1,694	1,500
DS75	13.00	11.70	10.25	7.90	75	75	2	2,250	1,344	1,694	1,660
DS90	15.20	13.60	12.30	9.90	90	75	2	2,250	1,344	1,694	1,680

DS15-16 and DS22-16 are stock products; other 16 bar models are available upon request.

Accessories and packages

Matching vertical air receivers, refrigerant dryers and in-line filters are available separately or in optimally pre-configured compressor packages.
Packages suit most industrial applications and combine performance, safety and affordability.

Read less...

To contact Glenco Air & Power about Senator DS Series Rotary Screw Air Compressors use Get a quote.

DS Series Rotary Screw Air Compressors(1.89MB)

Let Glenco Air & Power provide you with a quote

Supplier

Supplier: Glenco Air & Power

Location: Parkinson, QLD

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Glenco Air & Power are also proudly displaying these credentials:

Location:

Parkinson , QLD

Joined:

Nov 2026

Level:

SitePartner Storefront

Verified:

Is this your product? Manage products / company details |

Report this product